Operator’s Manual Classic Floor Machines
A Tacony Company
Fort Worth, Texas 76140-1710
Call Toll-Free (800) 880-2913
X8692 08.04
175 RPM, 1 HP models -
C171, C201
175 RPM, 1.5 HP models -
C171HP, C201HP
Sander, 175 RPM, 1.5 HP models -
C171SD
175 - 320 RPM, 1.5 HP models -
C202
Your new Powr-Flite floor machine will afford you many years of trou-
ble-free operating satisfaction provided it is given proper care. Prior to
packaging, your Powr-Flite floor machine was inspected by a Quality
Control Technician.
UNCRATING
Your Powr-Flite floor machine was protectively packed to prevent
damage in shipment. We suggest that upon removing the unit from its
carton, you carefully inspect it for any possible damage in transit. If
damage is discovered, immediately notify the transportation company
who delivered your machine. As a manufacturer, we are unable to act
upon any claim for concealed damage; you must originate the claim.
IMPORTANT SAFEGUARDS
This machine is designed to be safe when used to perform the
functions specified in this Operator’s Manual. Should damage occur to
electrical or mechanical parts, Prior to further use, the machine
should be repaired by the manufacturer or competent service center
to avoid further damage to the machine or physical injury to user.
Your floor machine is equipped with a safety switch lockout device
designed for your safety. Do not attempt to bypass or defeat the safe-
ty lockout device. Never use any device to lock the power switch trig-
gers in the ON position.
