Secure Bluetooth Access via Smart Phone
INSTALLATION INSTRUCTIONS
INTRODUCTION
The Presco™ OmGate provides an easy and secure method of remote opening
gates and doors directly from your smart phone via a bluetooth connection.
The smart phone app lets you know when you are approaching the OmGate and a
simple tap of the button on screen opens the door or gate. Alternatively you can
have the door or gate open automatically upon approach.
The application also works during phone calls and while using GPS applications.
The system allows for an administrator of the gate (Gate Keeper) who can
subsequently provide access to other users. Gate access is provided to users from
within the application, the user receives an invite and access through an SMS.
Users can be added or removed from the gate with ease and simplicity from within
the application. Extra Gate Keepers can also be added.
Up to 20 different OmGates can be managed from a single phone.
DEVICE SPECIFICATIONS
Voltage:
7-35 Volts D.C.
5-24 Volts A.C.
Current:
80 mA max.
Relay contacts:
30 Volt, 2 Amp D.C. SPST.
125 Volt, 1 Amp A.C. SPST.
Frequency:
2.4-2.48GHz
Transmission Power:
7 dBm
Operating Temperature:
-20
C to 70
C.
Size:
104mm x 72mm x 27mm.
Weight:
150gms.
APP SPECIFICATIONS
iOS:
Compatible with iPhone 4S and later with iOS 7 and higher.
Android:
Compatible with most Android-supported phones from 2013 and
later with Android 4.4 or higher.
CONNECTIONS
PINS 1 & 2
Power supply input, not polarity conscious.
(Red & Black wires).
PINS 3 & 4
Normally Open relay output.
(White & Yellow wires).
Note that the supplied wires in the connector can be
replaced by using a small screwdriver to depress the
orange tab, this will release the wire in the connector and
a new wire can be inserted whilst the orange tab is being
depressed. The new wire requires 8mm of the insulation
to be stripped before being inserted.
