background image

Pack Contents

Carefully check the contents of 
the box, which are:

Switcher-4 unit

Charging cable

4 x Device cables

These instructions

INSTRUCTIONS

Switcher-4

Product Description

Switcher-4

  is  specifically  designed  for 

wheelchair and lap-tray users needing to access 

multiple  communicators,  phones,  tablets 

and  similar  devices  using  either  one  or  two 

switches. This eliminates the need for multiple 

switches to operate each device.
The unit allows a single SimplyWorks

®

 wireless 

switch to be routed to one of four output jacks, 

allowing a single switch to operate up to four 

devices.  Alternatively,  two  SimplyWorks

®

 

wireless switches can be routed to two devices 

for two switch users.

A further SimplyWorks

®

 wireless switch selects 

which device is currently selected and a series 

of  LEDs  gives  a  visual  indication.  Optionally, 

an  audible  prompt  may  also  be  turned  on  to 

indicate the selected device, allowing the unit 

to be placed out of sight- for example beneath 

a wheelchair tray.
The unit has a built-in lithium battery which will 

provide  approximately  20  hours  of  operation 

between  charges.  The  unit  may  be  charged 

using any USB socket.

Summary of Contents for Switcher-4









Reviews: