background image

1

LED Floodlight with PIR - Black with 2m Cable

Model: PELL0289

Please read these instructions carefully before use and retain for future 

reference.

This floodlights must be installed by a qualified electrician in accordance with current 

building and IET wiring regulations (BS7671).

IMPORTANT SAFETY INFORMATION

• 

Do not use PVC cable to connect this floodlight to your wiring supply. Rubberised 

cable (type H05RN-F), with three conductors of at least 1.0mm² cross-sectional 

area must be used. This product must be connected to Earth.

• 

The front of this floodlight is made of tempered glass, replace if cracked. 

• 

LED lamps are extremely bright. To avoid possible damage to the eyes, do not 

stare into an LED beam.

• 

In use, avoid touching any external surface of the floodlight, due to the possibility 

of high temperatures.

• 

Do not use near flammable materials.

• 

The floodlight must be positioned so that there is at least 1m between the front of 

the light unit and the surface to be illuminated.

• 

It is suitable for use in an ambient temperature between -30°C and +45°C.

Summary of Contents for PELL0289

Page 1: ...conductors of at least 1 0mm cross sectional area must be used This product must be connected to Earth The front of this floodlight is made of tempered glass replace if cracked LED lamps are extremely bright To avoid possible damage to the eyes do not stare into an LED beam In use avoid touching any external surface of the floodlight due to the possibility of high temperatures Do not use near flam...

Page 2: ... fixing holes Drill the fixing holes and fix the floodlight into position using appropriate size screws and wall plugs not provided Check that it is securely fixed This floodlight is suitable for outdoor lighting applications for domestic use only Do not use in areas where an explosive or chemical atmosphere may exist Do not use in areas where ventilation is restricted It is suitable for mounting ...

Page 3: ...ighten the floodlight using the bolts on the brackets CLEANING MAINTENANCE Clean the floodlight only with a soft dry cloth Do not use any chemicals abrasives or solvents that could damage the floodlight The floodlight has a sealed LED lamp and is maintenance free The LED lamp cannot be replaced When the LED lamp reaches the end of its life the floodlight will have to be replaced OPERATION Time Sen...

Page 4: ...0kg Dimensions WxHxD mm 174x115x60 INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL ELECTRONIC EQUIPMENT When this product has reached the end of its life it must be treated as Waste Electrical Electronic Equipment WEEE Any WEEE marked products must not be mixed with general household waste but kept separate for the treatment recovery and recycling of the materials used Contact your local...

Reviews: