background image

 

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT

 

OSHA

SCAFFOLDING

ANSI

MEETS CODE A10.8

This manual provides important information on proper operation and maintenance. Every effort has been made to

ensure the accuracy of this manual. We reserve the right to change this product at any time without prior notice. IF

THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE, DO NOT USE THIS PRODUCT!

QUESTIONS? PROBLEMS? CALL CUSTOMER SERVICE AT 1-636-532-9888

If you need instructions on how to use this item properly, experience a problem, or need parts, call our customer

service department  Monday-Friday, 8 AM - 4 PM  Central Time. A copy of the sales receipt is required.

NOTE:  

This scaffold can be used indoors or outdoors on an even, flat surface. Do not store the scaffold

outdoors, as the wood platform is not water resistant. This item is not compatible with stem jacks.

WARNING: METAL CONDUCTS ELECTRICITY

Do not use this equipment where contact may be made with power lines or other live electrical circuits.

WARNING: DO NOT OVERLOAD THE MAXIMUM WEIGHT CAPACITY

This unit can support a maximum weight capacity of 1,000 lbs. 

The max load capacity decreases when stacking

units: One unit high = 1,000 lb,  Two units high with guardrails = 938 lb, Three units high with guardrails = 831 lb.

ITEM # GSSIPRO / GSSICARB / GSSI

MULTI-USE 6 FT BAKER-STYLE INTERIOR/EXTERIOR SCAFFOLDING

SAFETY, ASSEMBLY & OPERATING INSTRUCTIONS

1,000 LB MAX WEIGHT CAPACITY 

WORKERS & MATERIALS

Features non-slip walkboard

GSSICARB is TSCA Title VI Compliant

Summary of Contents for GSSI













Reviews: