background image

Handling-Short Instruction for

EtherSens-devices / MONI    V1.0

The EtherSens devices and 

MONI

 are data loggers according to their specification. Either for digital or analog

input- and output-signals, energy data or just as a pure messenger.

Commissioning of the device :
- EtherSens Bridge, EtherSens Control, 

MONI

:

Connect the voltage 24V DC ± 20% to the labeled terminal conn 24V and GND 

- EtherSens Energy, EtherSens Energy II, 

MONI

:

Connect the voltage 230V AC to the labeled terminal connectors L1 and N. 

The device starts up now,  you  will see the status of the device on the two-color illuminated LED display :

Green:

ON

device ready

OFF

device executes a restart or is powered off

Red:

ON

device is booting

flashing at device boot

device is updating the firmware

flashing 0,5 Hz

device is logging data

fast flashing

output of error codes (see below)

List of error codes:

1x flash: 

Initialization error of a sensor.

2x flashes: 

Space on the SD card smaller than 1 Kilobyte
or SD card removed without logging off.

3x flashes: 

Error at last mail transfer (SMTP).

4x flashes: 

Error at last time adjusting (NTP).

5x flashes: 

No network connection available (only when there isn’t a connection to the 
Access-Point and no LAN link state available).

When you want to reset your device (factory settings) you can press the reset button for 3s to 10s while the
device is booting. The button must be pressed with the help of a paperclip and can be found on the bottom / back
of the device.

Summary of Contents for EtherSens Bridge

Page 1: ... OFF device executes a restart or is powered off Red ON device is booting flashing at device boot device is updating the firmware flashing 0 5 Hz device is logging data fast flashing output of error codes see below List of error codes 1x flash Initialization error of a sensor 2x flashes Space on the SD card smaller than 1 Kilobyte or SD card removed without logging off 3x flashes Error at last mai...

Page 2: ...Point please check if your Access Point opens a network within the channel range named above If the Access Point opens a network in channel 12 or 13 please change the channel from your Access Point LAN communication Connect the RJ45 plug from your PC with the RJ45 plug from your EtherSens device Either you choose a patch cable or a cross link cable with crossed pins This is possible because the Et...

Page 3: ...n t hesitate to contact us Process Informatik Entwicklungsgesellschaft mbH Im Gewerbegebiet 1 DE 73116 Wäschenbeuren 49 0 7172 92666 0 info process informatik de https www process informatik de Copyright by PI 2020 9200 AD 24V OW QR Code Website Menutree Website Products docu downloads EtherSens Control 24V Analog Digital IO V1 0 o LAN Please make sure to update your drivers before using our produ...

Page 4: ...Störungen Einfache Montage Plug and Play Doppelbuchse Protection of data areas in the PLC You have in your facility machinery with complex program structures and want to prevent that the users do not change comprehensible content No problem with the S7 firewall you can assign specific data fields to each user or even generally protect certain data areas in the PLC ...

Reviews: