MR2S is Mifare UID Reader with 1-Wire and
RS232 interface, designed to integrate with
vehicle trackers and the other controllers.
With 10~48VDC power input, it’s convenient to
install the reader in different vehicles. It aims to
offer more flexibility to build solutions at
affordable cost, can be used alternatively for
iButton and get your solution working with low
cost Mifare cards.
Frequency: 13.56MHz
Read UID of ISO 14443A Mifare, DESFire card
Support data Output 1-Wire, RS232
Support the other 1-Wire input interface
Available to install on metal surface
Available to install on different vehicles
Weather resistant
Transmit Frequency
OPERATING
Transponder
Interface
ELECTRICAL
MECHANICAL
ENVIRONMENTAL
Power Input
Current Consumption
Dimensions
Weight
Temperature
Humidity
13.56MHz Standard
1-Wire & RS-232
10 to 48 VDC
About 30 mA @12VDC
Length : 77.5 mm / Width : 42.5 mm / Height : 15 mm
85 gm (With Cable)
Operating : -20 ℃ to 70 ℃
Storage : -30 ℃ to 80 ℃
Operating : 10 % to 90 % noncondensing
Storage : Up to 90 % noncondensing
Cable Length
90 cm +/- 2cm
Reading distance
2~5 cm Typ
ISO14443A Mifare, DESFire, Ultralight card
TM951333-2
Page 1
