THE MONITOR IS DESIGNED FOR PROGRAMMABLE MAGNETIC BIKES AND INTRODUCED
WITH THE FOLLOWING CATEGORIES :
- KEY
FUNCTIONS
- ABOUT
DISPLAYS
- OPERATING
RANGES
- THINGS YOU SHOULD KNOW BEFORE EXERCISING
- OPERATION
INSTRUCTIONS
KEY FUNCTIONS
THERE ARE TOTAL 6 KEYS INCLUDING START / PAUSE, ENTER, MODE, UP, DOWN, AND
RECOVERY.
A. START / PAUSE : STARTS OR STOPS THE PROGRAM CHOSEN. AND, RESETS THE
MONITOR BY PRESSING AND HOLDING FOR 2 SECONDS.
B. ENTER : CHOOSES THE FUNCTIONS FROM PROGRAMS, GENDER, HEIGHT, WEIGHT, TIME,
DISTANCE, WATT, TARGET HEART RATE, AGE, AND 10 COLUMNS. THE CHOSEN
FUNCTION SHALL FLASH. PLEASE NOTE THAT NOT ALL THE FUNCTIONS CAN BE
SELECTED IN EVERY PROGRAM ACCORDING TO THE TYPES OF EACH PROGRAM.
C. MODE : CHANGES THE DISPLAYS OF THE VALUES BETWEEN RPM OR SPEED, AND CAL
OR WATT. THE VALUES OF RPM AND WATT SHOW AT THE SAME TIME, OR THE VALUES
OF SPEED AND CAL DO BY PRESSING IT.
D. UP (
) : SELECTS OR INCREASES THE VALUES OF PROGRAMS, GENDER, HEIGHT,
WEIGHT, TIME, DISTANCE, WATT, TARGET HEART RATE, AGE, AND 10 COLUMNS.
E. DOWN (
) : SELECTS OR DECREASES THE VALUES OF PROGRAMS, GENDER, HEIGHT,
WEIGHT, TIME, DISTANCE, WATT, TARGET HEART RATE, AGE, AND 10 COLUMNS.
F. RECOVERY : STARTS THE FUNCTION OF PULSE RECOVERY. WHEN PRESS AGAIN WILL
OUT OF PULSE RECOVERY MODE.
G. LCD CONSTRAST CALIBRATION :
1. DURING STOP MODE, PRESS & HOLD ENTER &
( + ) KEYS SIMULTANEOUSLY FOR
EVER 2 SECONDS TO ENTER LCD CONTRAST CALIBRATION MODE.
2. THEN YOU CAN PRESS
( + ) OR
( - ) KEY TO ADJUST THE LCD CONTRAST TO BE
LIGHTER OR DARKER.
3. AFTER COMPLETION LCD CONTRAST CALIBRATION. PRESS START/PAUSE KEY TO EXIT.
TH
4. THERE ARE 16 DIFFERENT LCD CONTRAST LEVEL AND THE DEFAULT VALUE IS IN 8
LEVEL..
- 1 -
MONITOR INSTRUCTION
TIME
RPM SPEED
MPH
DISTANCE KJOULE WATT TARGET
H.R HEART
RATE
AGE
KM/H
HEIGHT
WEIGHT
START
STOP
PROGRAM
L E V E L
BODY TYPE
BMI
BMR
FAT%
