background image

wave

blue

All Pyle products are carefully constructed and thoroughly tested before 

shipment. Products purchased in the USA are warranted to be free of defects 

in material and workmanship for two (2) years from the date of purchase. This 

warranty is limited to the original retail purchase.

Should the product fail due to factory defects in material or workmanship, 

your unit will be repaired or replaced at the sole discretion of Pyle.

To obtain warranty ser

vice you must first call our Consumer Return Hotline 

number at (718) 236-6948 to obtain a Return Authorization number. This 

R.A.# must appear on the outside of your package and on all paperwork 

relating to your return.

When returning a product to us for warranty service it must be carefully packed 

and shipped prepaid to:

You must also include the following items:

• A copy of your sales receipt or other proof of purchase

• A brief letter indicating the problem you are experiencing

• include in your letter your return address, daytime phone number

    and R.A. number

• also include a check or money order for $12.00 for return shipping, 

    handling, and insurance, or provide your Visa/MC number with  

    expiration date.

R.A.#

Pyle Service Center

1600 63rd Street

Brooklyn, NY 11204

Our obligation under this warranty is limited to the repair or 

replacement of the defective unit when it is returned to us prepaid. 

This warranty will be considered void if the unit was tampered with, 

improperly serviced, or subject to misuse, neglect, or accidental 

damage.

limited warranty policy

a

m

p

l

i

f

i

e

r

s

h i g h   p e r f o r m a n c e   c a r   a u d i o   a m p l i f i e r

user’s manual

blue  

wave

www.pyleaudio.com

PLA1485R

PLA985R

PLA585R

Summary of Contents for PLA1485R














Reviews: