background image

TV Size Range: 37

55

Maximum Weight Capacity: 35kg/77lbs

VESA: 700X500

Safety automatic lock

Unlock cord

"~ "

This product was designed to be installed on wood stud walls and solid concrete walls.
Before installing make sure the supporting surface will support the combined load of the
equipment and hardware. Never exceed the Maximum Load Capacity. This product is
intended for indoor use only. Use of this product outdoors could lead to product failure or
personal injury.The depth of this mount(1.3 ) may not provide sufficient space for proper
ventilation on some screens. Please refer to the manufacturer’s requirements for mounting
your screen befourinstallation.

"

CAUTION

-8-

This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children
1.Make sure these instructions are read and completely understood before attempting
installation. If you are unsure of any part of this installation, contact a professional
installer for assistance.
2.The wall or mounting surface must be capable of supporting the combined weight of
the mount and the display; otherwise the structure must be reinforced
3.Safety gear and proper tools must be used. A minimum of two people are required
for this installation. Failure to use safety gear can result in property damage, serious
injury or death.

!

.

Warning

-5

15

°~ °

±5°

±180

°

±180

°

±180

°

Part 5-Adjusting display and using cord management

Route cords along articulating arms using cord management

s.

Articulating arms can be adjusted to position display into desired location.
Use wrench(8) to tighten and loosen the tension screw. Do not overtighten
or overloosen to make the screws come out.

clip

Part 5-Adjusting display and using cord management

5x5

4x4

Wrench

Wrench

Thank you for choosing our product

Thank you for choosing our product

www pyleaudio com

.

.

P yle Audio
1600 63rd st , Brooklyn, NY, 11204
(718)236-8000

Item No.:

PSWLE82

Item No.:

PSWLE82

INSTALLATION GUIDE

Summary of Contents for PSWLE82

Page 1: ...attempting installation If you are unsure of any part of this installation contact a professional installer for assistance 2 The wall or mounting surface must be capable of supporting the combined weight of the mount and the display otherwise the structure must be reinforced 3 Safety gear and proper tools must be used A minimum of two people are required for this installation Failure to use safety...

Page 2: ...of wall plate 1 Then swing the screen down Fixed slide block 7 into wall plate by screw 6 2 Always use an assistant or mechanical lifting equipment to safely lift and position heavy equipment Part 4 Mounting the flat panel screen NOTE 2 5 2 Plastic cover Magnetic removable bubble level A D H E G F 6 7 7 2 Slide block Position lock A 4 M4 mm 16 bolt 6 7 8 8 2 Wrench 4x4 5x5 Use the box wrench to lo...

Page 3: ...screen A D E Square washer E Small hole for M4 screws Medium hole for M5 and M6 screws Large hole for M8 screws Wood stud Stud finder 2 50mm Φ3 16 5mm Part 1a Wood Stud Mounting Use wall plate 1 as a template make sure it is level and mark four mounting holes along the center lines of the wood studs Drill four 3 16 5mm dia holes 2 50mm deep Level wall plate 1 and attach to wall with four long bolt...

Page 4: ...e televesion once you want to uninstall the TV it can help you to take out the brackets 3 2 50mm Φ3 8 10mm Part 1b Concrete Wall Mounting Level wall plate 1 and use wall as a template to mark four holes Drill four 3 8 10mm dia holes 2 50mm deep Insert four anchors H into holes and secure wall plate with four long bolts G and four washers F Tighten screws firmly Do not overtighten Part 1b Concrete ...

Reviews: