PYRAMID DIG-4B, DIG-6B DIGITAL CLOCK
Operation Instructions
I2009 REV. G
888.479.7264
SET TIME
Plug clock into standard electrical outlet. Clock displays 88:88 (DIG-4B) or 88:88:88 (DIG-6B).
To set time, hold clock display facing towards you and locate two buttons on back of clock.
With clock display facing you, press left hand button to set hour. Press right hand button to set
minute. PM is indicated by the PM indicator light in upper left hand corner.
To change clock from 12 Hour to 24 Hour mode, locate two buttons on back of clock.
Press both buttons at same time and hold until clock displays “24” then release
buttons. Clock will display 00:00. Set time per “SET TIME” instructions above.
To return to 12 Hour mode, press two buttons again at the same time until clock
displays “12”, then release buttons. Clock will display 12:00 when ready to set time.
24 HOUR MODE (MILITARY TIME)
