background image

 

 

RFID Cam Lock Product Guide

 

 

     

Technical Data 
Dimensions               
Material                      Zinc alloy housing and handle 
                                    Mechanical override key 
                                    Fixing screws and cam   
Input Voltage              DC3V   
Battery                        2 X AA alkaline batteries 

Service life 60,000 locking cycles 

Static Power               

100uA 

Dynamic Power         

170mA 

Use condition              Temperature: -15

~65

℃;

 

Humidity: 5%~95% 

 
Features:

 

 

 

Works with most Mifare solutions @ 13.56MHz 

 

Three level system for user administration 

 

Quick and easy operation 

 

No external programming devices needed 

 

LED in 2 colors for lock status (green/red)         

 

Application for metal, wooden and plastic doors 

 

Can be used right/left handed on door thickness up to 20mm 

                                                                                 

     

                                                                                                                     

 

 

Handle 

Induction Area 

Emergency opening 

 

Item No.: PL730 

www.qilocks.com         sales@qilocks.com         +44 (0)20 8906 6881

Summary of Contents for PL730

Page 1: ...70mA Use condition Temperature 15 65 Humidity 5 95 Features Works with most Mifare solutions 13 56MHz Three level system for user administration Quick and easy operation No external programming devices needed LED in 2 colors for lock status green red Application for metal wooden and plastic doors Can be used right left handed on door thickness up to 20mm Handle Induction Area Emergency opening Ite...

Page 2: ... public mode a red light will flash every 5 seconds to indicate the locker is in use Change from Private use into Public use Hold Main admin card to lock for 1 2 seconds green light flashes 3 times then repeat again for 3 seconds until green light flashes setup successfully Repeat the above process to switch back to Private use How to operate the lock Open Present the User card Admin card to the l...

Page 3: ...the battery cover press the reset button until the lock flash 4 times then release the button reset successfully Deprogramming individual Admin cards Hold the Main Admin card in front of the lock for about 5 seconds green light flashes 3 times until it flashes red one time remove the card After that the Admin card to be deprogrammed is held for approximately 5 seconds in front of the lock green li...

Page 4: ...ashing 3 times for the below cases 1 The RFID card was recognised i e this card has already been programmed with this particular LOCK 2 Confirmation that the action programming or deprogramming was successfully completed Red light blinking for the below cases 1 The RFID card was not recognised i e this card has not yet been programmed with this particular LOCK 2 Presented the wrong card when progr...

Reviews: