QNN SAFE AUSTRALIA PTY LTD
ABN 47 168 078 233
Unit 9 / 376 Newbridge Road, Moorebank NSW 2170
Web site:
www.qnnsafe.com.au
Email:
info@qnnsafe.com.au
Phone: 02-87982669
Page 1 of 3
USER’S MANUAL FOR ZF II SERIES
FINGERPRINT SAFE
Serial Number:
This package contents:
User manual
2 Master keys
1 External Battery Box
2 Bolt Down Screws
M12mmx80mm
4 AA Batteries
2 Emergency back up Keys
Please contact your retailer or Qnn Safe Australia P/L if any shortage occurred
For the first time use, it needs the external battery power support:
Insert the supplied 4 AA batteries into the External Battery Box
Connect the power to the front panel. The power inlet is located at right hand side
of the panel.
After the safe is opened, please replace the batteries into the internal battery
box, which is located behind the door plate, please slid the box cover upward
or downward to open.
Prepare the Master Key into the position
Place any one of your fingers on the
Reading Window
, until a green light is on with two
beeps.
Turn Master Key clockwise and turn the knob clockwise, safe now is unlocked.
( For some model, just turn the master key to unlock the safe)
This safe is operated by the Master Key and the Registered Fingerprint.
As factory default, there is no fingerprint be registered at this stage
Any person could open the safe with the Master Key.
