background image

 1 

 

 

 

 

                        7039-174C 

 

 

 

 August 01, 2016

DISCOVERY I WOOD APPLIANCE

Automatic Combustion Control (ACC)

Model: DISCOVERY-I

 

 

HOT SURFACES!

 

 

Glass and other surfaces are hot 

 

 

during operation AND cool down.  

Hot glass will cause burns.

• 

Do not touch glass until it is cooled

• 

NEVER allow children to touch glass

• 

Keep children away

• 

CAREFULLY SUPERVISE children in same room as 

appliance.

• 

Alert children and adults to hazards of high temperatures

•  High temperatures may ignite clothing or other 

flammable materials.

• 

Keep clothing, furniture, draperies and other flammable 

materials away.

 WARNING

If the information in these instruc-

tions is not followed exactly, a 

fire could result causing property 

damage, personal injury, or death.

 

•  Do not store or use gasoline or other flam-

mable vapors and liquids in the vicinity of 

this or any other appliance.

•  Do not overfire - If appliance or chimney 

connector glows, you are overfiring. Overfir-

ing will void your warranty.

•  Comply with all minimum clearances to 

combustibles as specified.  Failure to 

comply may cause house fire.

WARNING

WARNING

Fire Risk.

For use with solid wood fuel only.

Other fuels may overfire and generate 

poisonous gases (i.e. carbon monoxide).

Installation Manual

Installation & Appliance Set-Up

INSTALLER: Leave this manual with party responsible for use and operation. 

OWNER: Retain this manual for future reference. 

NOTICE: DO NOT DISCARD THIS MANUAL

NOTE

To obtain a French translation of this manual, please contact 

your dealer or visit www.quadrafire.com

Pour obtenir une traduction française de ce manuel, s’il vous 

plaît contacter votre revendeur ou visitez www.quadrafire.com

O-T  L

Tested and 

Listed by

Portland

Oregon USA

OMNI-Test Laboratories, Inc.

C

US

Installation  and  service  of  this 

appliance should be performed by 

quali ed personnel. Hearth & Home 

Technologies  recommends  HHT 

Factory  Trained  or  NFI  certified 

professionals.

Summary of Contents for Discovery I Wood Appliance





















Reviews: