background image

QuadraTop

®

Adventure

®

Top

S

The Trusted Source

®

Installation Manual: for 2007-Current Wrangler (JK) 2 Door 

#

11113.1235 

TO REDUCE RISK OF SERIOUS INJURY OR PROPERTY DAMAGE:
READ ALL SAFETY MESSAGES AND UNDERSTAND ALL INSTRUCTIONS
AND PROCEDURE 

NOTICES

BEFORE ATTEMPTING TO INSTALL OR USE

THIS PRODUCT. FOLLOW ALL INSTRUCTIONS AND WARNINGS WITH
PRODUCT & VEHICLE OWNERS MANUAL.

LOSS OF VEHICLE CONTROL INVOLVES RISK OF DEATH OR SERIOUS
INJURY, PARTICULARLY TO PARTS OF YOUR BODY NOT RESTRAINED
WITHIN VEHICLE. THIS PRODUCT IS INTENDED FOR WEATHER PROTEC-
TION ONLY AND SHOULD NOT BE RELIED UPON TO CONTAIN OCCUPANTS
IN THE EVENT OF AN ACCIDENT OR TO PROTECT FROM EITHER GROUND
CONTACT OR FALLING OBJECTS.

TO REDUCE RISK OF ACCIDENT OR INJURY:

ALWAYS WEAR SEATBELTS. ALWAYS KEEP HEAD, ARMS & BODY PARTS
WITHIN VEHICLE. FULLY SECURE OR STOW THE SOFT TOP BEFORE
DRIVING ACCORDING TO INSTRUCTIONS. NEVER TRY TO LATCH OR FOLD
SOFT TOP WHILE DRIVING. DO NOT USE IF DAMAGED OR WORN. READ
AND FOLLOW ALL INSTRUCTIONS & WARNINGS ACCOMPANYING THIS
PRODUCT, IN YOUR VEHICLE OWNER’S MANUAL AND OFF ROAD
DRIVING SUPPLEMENT.

RISK OF EYE INJURY! SAFETY GLASSES MUST BE WORN AT ALL TIMES
WHILE INSTALLING OR MAINTAINING THIS PRODUCT. 

ADV_2DR_S_UPDATED.qxp_QTOP  5/23/17  11:44 AM  Page 1

05232017114837

Summary of Contents for QuadraTop Adventure Top S





















Reviews: