background image

For a perfect viewing experience, make adjustments 

by loosening the screws slightly on the projector mount and 

tighten them to secure the position with an allen key.

Roll ±8°, Pitch ±20°, Rotate 360°

Adjustments

4

CAUTION! 

Do not exceed the maximum rated weight 

specified. Otherwise, serious injury or 

property damage may occur.

32kg

(70lbs)

RATED

5 Year Limited Warranty

Version August 2017

5 Year Limited Warranty

QG-PRO-PM-50-B

QG-PRO-PM-50-W

HEAVY! 

Use an assistant for this step. 

IMPORTANT!

Do not loosen screws all the way when making adjustments, this will disconnect the
parts and may cause injury or property damage.

20

20

8

8

1.5" NPT Pipe

(not included)

Version August 2017

Scan the QR Code™ below 

for more info about this product:

Summary of Contents for QG-PRO-PM-50-B

Page 1: ...ied Otherwise serious injury or property damage may occur 32kg 70lbs RATED 5 Year Limited Warranty Version August 2017 5 Year Limited Warranty QG PRO PM 50 B QG PRO PM 50 W HEAVY Use an assistant for this step IMPORTANT Do not loosen screws all the way when making adjustments this will disconnect the parts and may cause injury or property damage 20 20 8 8 1 5 NPT Pipe not included Version August 2...

Page 2: ...ightening can damage the items greatly reducing their holding power ALL QUALGEAR products are intended for indoor use only and any outdoor use voids the limited warranty For warranty information please visit http www qualgear com warranty php Never exceed the maximum rated weight specified in this manual All hardware must be used at the designated points in the installation instructions to prevent...

Page 3: ...ing on your projector adjust the extension brackets on the projector mount A accordingly by using allen key D If your projector model has three mounting holes only please remove the fourth extension bracket using allen key D Allen Key D gap TIP Do not tighten the screws leave a gap for mounting on the next step WARNING Installers are responsible to provide hardware for other types of mounting situ...

Page 4: ... then attach the projector mount to the projector and tighten with allen key C or D Make sure arrow points to the projector screen Projector not included Tighten the screws K using allen key D as shown on the right Screws E F G H Allen Key C D Washers I For screws E or F only NOTE Use washers I only when using screws E or F Projector not included Allen Key D Projector Plate Click 5 6 TIP ...

Reviews: