background image

CONTENTS:

•  Driver for 4 markers 

•  4 piece set of 50mm markers with 5 

meter cable

•  Battery pack 14.8V 2200 mAh, Li-lon 

charger and battery cable

•  2 meter sync cable

•  IR Receiver with 5 meter cable

Long Range Active Marker

POWER

The Long Range Active Marker is delivered with a battery pack, which 
contains a rechargeable LI-ION battery.  When the POWER/BATT LOW 
LED flashes red, it is time to charge the battery. The charging time for an 
empty battery is about 3 hours and 30 minutes. The control box can also 
be powered by any 12VDC power supply.

PERFORMANCE

•   The Long Range Active Marker can be used with frequencies from 1 to 

200 Hz. The marker will not work correctly above 200 Hz.

•   The maximum triggering distance for the IR eye is at least 100 m.

•   When the control box is operated on battery power, it will enter standby 

mode after 30 seconds (power LED flashes green) and shut itself down 
automatically after 6 hours to save battery.   

•   The continuous operation with 4 markers at 100 Hz is 9 hours with the 

supplied battery pack. Other operation times can be calculated from 
frequency and the number of markers connected to the control box.

2018-05-07

qualisys.com  sales@qualisys.com 

LONG RANGE ACTIVE MARKER 

Reviews: