A
M6x25mm
C
D
M4x12mm
2
B
E
G
4
F
H
4
4
6
2
M8x16&M8X36
4+4
M8x25mm
4
1
4+4
Installation
guide
QMW101
Accessory list
Attention: The drawings below are only for reference and might be slightly
different from the actual object. For any tools missing or installation
problems, please contact customer service.
90kg
1080-1820mm
32"-86"
Maximum load capacity
Height Range
Suitable TV Sizes
Technical data
No.
Image
Spec
Qty
Rectangular Washer
Magnetic Level
Washer
Spacer
Component list
1. Product: Motorised Trolley / Media Wall (x1)
2. Top cover (x1)
3. Storage box (x2)
4. TV bracket (x1)
5. TV bracket arms (x2)
6. Rotary Knob (x2)
STEP 1
Remove the corner guards on both
sides of the foot of packaging.
Figure A
Figure B
STEP 2
Open up the legs
Open up the legs according to the directions shown on the picture, and when you hear
"click" the foot setting is finished.
STEP 3
Remove top metal plate and then install top covers
Use a screwdriver to remove the corners on both sides of the product.
The removed parts are no longer required.
1
Click
Click
Install top shield plate with rotary knob.
Screw Driver
Screw Driver
1
2
3
4
5
6
Put the product up side down. Remove the corner guards on both sides of
the bottom foot of the product with a screwdriver (figure A) . Then install the
screw on the bottom foot on the threaded hole of sheet metal (figure B).
