Quark-Elec QK-A031 Manual Download

Page: 1 / 15

Quark-Elec Manual

https://www.quark-elec.com

1 of 15

2016

V1.0

QK-A031 NMEA 0183 Multiplexer with SeaTalk Converter
Features



Multiplex up to three NMEA 0183 input devices



Galvanically isolated NMEA and SeaTalk input ports



Configurable baud rates: (4.8, 9.6, 38.4k input and output)



Differential NMEA output with galvanically isolated protection



Simultaneous wireless and USB output



The internal WiFi access point connects up to 4 devices simultaneously



SeaTalk to NMEA 0183 protocol converter



Wide range of power supply voltage tolerance (DC 9-35 Volts)



Compatible with Windows, Mac, Linux, Android and iOS (Initial Configuration must be
completed using Windows software.)



This device connects to NMEA 0183 and is compatible with RS422F output devices. NMEA
0183-RS232 devices can connect to our device by using the Garmin Bridge (QK-AS03).



This device does not come pre-loaded with map data. We advise using openCPN for map

data. Some iOS apps may charge for map use.

Summary of Contents for QK-A031
















Search results

Summary of Contents for QK-A031

Reviews:

Related manuals for QK-A031

Brands by name

Popular brands

Quark-Elec QK-A031, Manual

Search results

Summary of Contents for QK-A031

Reviews:

Related manuals for QK-A031

Brands by name

Popular brands