QR1 Rigging Installation Guide
QR1 Touring Spine Hanging Bracket
Order Ref: ACHPI-QR1
Introduction
The QR-1 Touring Spine (t-Spine) is
recommended for a precise and easy
hanging setup of the speaker when
used for flying a single speaker.
Kit Contents
• t-Spine
• Quick Pin 8 x 50
• Screws (2 x M10)
Mounting the Speaker
The T-Spine is attached to the top of
the loudspeaker with the two bolts
supplied. Coat the bolts with thread
locking paste for maximum protection
against bolts becoming loose over time.
