background image

©

 2002 RadioShack Corporation.

All Rights Reserved.

RadioShack and RadioShack.com are trademarks 

used by RadioShack Corporation.

15-2125

OWNER’S MANUAL — Please read before using this equipment.

Thank you for purchasing the RadioShack 3-in-1 Football Remote. Your remote is a state-of-
the-art device specially designed to operate the major functions of your television (TV), video 
cassette recorder (VCR), and cable converter (CBL). It is compatible with most popular brand 
TV, VCR, and CBL devices. The remote is pre-programmed before you purchase it. Input the 
correct pre-installed code for your device and remote is ready to use.

±

+056#..+0)

"

$#66'4+'5

Your remote requires two AA batteries (not 
supplied) for power. For the best 
performance and longest life, we 
recommend RadioShack alkaline batteries. 

.

1. Unseal the flap on the remote, then pull 

out the battery compartment.

2. Use a Phillips screwdriver to loosen the 

screw on the battery compartment 
cover, then remove the cover.

3. Place two AA alkaline batteries in the 

compartment as indicated by the 
polarity symbols (

+

 and –) marked 

inside.

4. Replace the cover and secure it with the 

screw.

5. Replace the battery compartment and 

seal the flap.

6. When the remote stops operating 

properly, replace the batteries within 10 
minutes of removing the old batteries. 
Otherwise, the programmed settings 
and codes will be lost. 

R

241)4#//+0)

"

6*'

"

4'/16'

While programming, make sure to aim the 
remote at the device and that the distance 
between the remote and device is within 21 
feet (7 meters). 

See “Code List” on Page 3 and write down 
the codes for your device.

1. Manually turn on your TV, VCR, or 

cable converter. 

#

"

+/2146#06

"

#

If an icon appears at the end of a paragraph, 
go to the box on that page with the 
corresponding icon for pertinent information.

— Warning 

 

#

 — Important

.

.

.

.

 — Caution 

 

°

°

°

°

 — Hint

±

 — Note

TV/VCR/CBL — Selects 
the desired device 
type.

PWR — Turns the 
selected device on or 
off.

CH

++++

/CH– 

Selects a channel.

VOL

++++

/VOL– 

Adjusts the volume.

MUTE — Turns the 
sound off or on.

SET — Initiates 
programming mode.

TV/VCR — Switches 
the view between 
TV and VCR.

JJJJ

 — Play

''''

 

— Stop

ENTER — Press 
after entering 
channel numbers 
(on some TV 
models).

#

#

#

#

 — Rewind

,

,

,

,

 — Fast Forward

f

ff

f

 — Pause

´

´

´

´

 — Record

±

.

"

%#76+10

"

.

Use only fresh batteries of the required size 
and recommended type.

Do not mix old and new batteries, different 
types of batteries (standard, alkaline, or 
rechargeable), or rechargeable batteries of 
different capacities.

If you do not plan to use the remote control 
for a month or longer, remove the batteries. 
Batteries can leak chemicals that can 
destroy electronic parts.

Rechargeable batteries are to be removed 
from the toy before being charged.

Rechargeable batteries are only to be 
charged under adult supervision.

Batteries are to be inserted with the correct 
polarity.

Do not short-circuit the battery terminals.

Remove exhausted batteries from the toy.

Do not attempt to charge non-rechargeable 
batteries.

R

"

9#40+0)

ý

R

"

Dispose of old batteries promptly and properly. 

5/

KP

/3"

(QQVDCNN

"

4GOQVG

±

"

016'

"

±

"

The remote’s function keys work the same 
as the ones on the original remote control 
supplied with your device. However, certain 
function keys, such as CH+

 

and CH–, might 

not work correctly depending on the type of 
device you are using.

To avoid damaging the video tape, you 
must press RECORD twice to begin 
recording.

Reviews: