background image

©

 2002 RadioShack Corporation.

All Rights Reserved.

RadioShack and RadioShack.com are trademarks 

used by RadioShack Corporation.

15-2127

OWNER’S MANUAL — Please read before using this equipment.

Thank you for purchasing the RadioShack 3-in-1 Universal Remote Control – Golfbag Style. It 
is a state-of-the-art device specially designed to operate the major functions of your television 
(TV), video cassette recorder (VCR), and cable converter (CBL). It is compatible with most 
popular brand TV, VCR, and CBL devices. The remote is pre-programmed before you 
purchase it. Input the correct code for your device and the remote is ready to use.

+056#..+0)

"

$#66'4+'5

Your remote requires two AA batteries (not 
supplied) for power. For the best 
performance and longest life, we 
recommend RadioShack alkaline 
batteries.

.

.

.

.

1. Unseal the flap on the remote, then pull 

out the battery compartment.

2. Use a Phillips screwdriver to loosen the 

screw on the battery compartment 
cover, then remove the cover.    

3. Place two AA alkaline batteries in the 

compartment as indicated by the 
polarity symbols (+ and –) marked 
inside.

4. Replace the cover and secure it with the 

screw. 

5. Replace the battery compartment and 

seal the flap. 

±

±

±

±

241)4#//+0)

"

6*'

"

4'/16'

While programming, make sure to aim the 
remote at the device and that the distance 
between the remote and device is within 21  
feet (7 meters).

1. Refer to the “Code List” on Page 3 and 

write down the codes for your device.

2. Manually turn on your TV, VCR, or 

cable converter.

3. Press 

TV

VCR

, or 

CBL

 to select the 

desired device type. The red LED blinks 
once.

4. Hold down 

SET

 until the red LED blinks 

twice. 

5. Enter the 4-digit code. If the code is 

valid, the red LED blinks twice.

6. Aim the remote control at the device 

and press 

PWR

. The device should turn 

off. 

±

±

±

±

 

#

"

+/2146#06

"

#

If an icon appears at the end of a paragraph, 
go to the box on that page with the 
corresponding icon for pertinent information.

— Warning 

 

°

°

°

°

 — Hint

.

.

.

.

 — Caution 

 

±

±

±

±

 — Note

#

 — Important

SET — Initiates 
programming mode.

PWR — Turns the selected 
device on or off.

TV/VCR/CBL — Selects the 
desired device type.

TV/VCR — 
Switches the 
view between 
the TV and VCR.

VOL

++++

/

VOL  Adjusts 

the volume. 

MUTE — Turns the sound on 
or off.

CH

++++

/

CH– Selects a channel.

#

#

#

#

 — Rewind

çççç

 — Record

ENTER — Press after entering 
channel numbers (on some TV 
models).

JJJJ

 — Play

''''

 — Stop

f

ff

f

 — Pause

,

,

,

,

 — Fast Forward

Battery Compartment

RESET — Resets stored 
remote settings.

R

"

9#40+0)

"

R

"

Dispose of batteries promptly and properly.

.

"

%#76+10

"

.

• Use only fresh batteries of the required size 

and recommended type.

• Do not mix old and new batteries, different 

types of batteries (standard, alkaline, or 
rechargeable), or rechargeable batteries of 
different capacities.

• If you do no plan to use the remote control 

for a month or longer, remove the batteries.

• Rechargeable batteries are to be removed 

from the remote before being charged.

• Rechargeable batteries are only to be 

charged under adult supervision.

• Batteries are to be inserted with the correct 

polarity.

• Do not short-circuit the terminals.

• Do not attempt to charge non-rechargeable 

batteries.

±

"

016'

"

±

"

Installing Batteries

When the remote stops operating properly, 
replace the batteries within 10 minutes of 
removing the old batteries. Otherwise, the 
programmed settings and codes will be lost. 

Programming the Remote

If the device does not turn off, repeat steps 
3–5, using another code from the Code List for    
your device until you find one that works.

5/

KP

/3"

7PKXGTUCN

"

4GOQVG

"

%QPVTQN

"

L

"

)QNHDCI

"

5V[NG

Summary of Contents for 15-2127

Page 1: ... digit code If the code is valid the red LED blinks twice 6 Aim the remote control at the device and press PWR The device should turn off 2146 06 If an icon appears at the end of a paragraph go to the box on that page with the corresponding icon for pertinent information Rý Rý Rý Rý Warning Hint Caution Note Important SET Initiates programming mode PWR Turns the selected device on or off TV VCR CB...

Page 2: ...ll components can be operated with an infrared remote control CH and CH do not work with your RCA TV Due to an RCA design 1983 1987 only the original remote control can operate these functions Changing channels does not work properly The original remote control might require pressing ENTER to change channels Press ENTER after entering a channel number Limited Ninety Day Warranty This product is wa...

Page 3: ...d 0002 0006 0007 Soundesign 0021 0022 0023 Crosley 0009 Minutz 0004 Squareview 0020 Crown 0023 Mitsubishi 0003 0014 0016 0021 Starlite 0023 Curtis Mathes 0001 0005 0006 0007 0009 0010 0011 0014 0015 0017 0019 0026 Motorola 0014 Supreme 0000 Daewoo 0003 0013 0026 Multitech 0023 Sylvania 0005 0009 Daytron 0003 NAD 0018 0019 0021 Symphonic 0020 Denon 0015 NEC 0003 0005 0010 TMK 0010 0021 Dumont 0002 ...

Page 4: ...TMK 0101 Emerex 0082 Nikko 0084 Teac 0080 Emerson 0080 0081 0084 0087 0096 0098 0099 0103 Noblex 0101 Technics 0083 0097 Fisher 0089 0095 Olympus 0083 Teknika 0080 0083 0084 Fuji 0083 Optimus 0084 0090 0095 0097 0104 Thomas 0080 Funai 0080 Orion 0081 0098 0099 Toshiba 0087 0088 GE 0083 0090 0091 0101 Panasonic 0083 0097 0100 0104 Totevision 0084 0101 Garrard 0080 Penney 0083 0084 0086 0101 Unitech...

Reviews:

Related manuals for 15-2127