Please read this user’s guide before
installing, setting up and using your new product
www.radioshack.com
Thank you for purchasing your Wireless
Security Keychain Remote from
RadioShack.
keychain remote
Two CR2016 lithium batteries (installed)
what’s included
1. Press and hold down
arm
for 3-4 seconds,
and then release it.
Note: If you need to register the keychain
remote a second time, remove the batteries,
and then hold down
arm
for 3-4 seconds to
pick up a random code.
2. Press
menu start
or on your security
system console.
ENTER PIN
(Personal
Identification Number) appears on the
display.
3. Use the console keypad to enter your four-
digit PIN. * appears on the display as each
digit is pressed. After you enter your PIN
, 1.
INSTALL
appears.
4. Press
ok
and
1. INSTALL / ZONE
appears.
5. Press any button on your keychain remote.
RMOT 1 SET
appears on the console display
to confirm registration.
6. Press
clear
to return to the setup screen.
Press
clear
again to confirm your exit from
setup mode. Press
1
to return to the main
display, or press
2
to stay in setup mode.
See your Wireless Security Kit User Guide (49-
1000) for instructions on changing your PIN.
49-1002
Wireless Security
Keychain Remote
registering your keychain remote
Use your wireless keychain remote to arm and disarm your Wireless Security Kit
(49-1000). Your Wireless Security Kit includes one keychain remote, and you can purchase
up to 15 additional keychain remotes (16 total) to use with your system. Your keychain can
also control devices connected to remote modules (such as a lamp) that are controlled by
your Wireless Security System. Your keychain includes random digital security coding for
enhanced security.
Press to arm your security system (door/window sensors,
motion detectors).
Press to disarm your security system.
on
and
off
(
A
and
B
)
allow you to turn on and off up to two
devices that are connected to home automation modules,
such as a 61-3002 Lamp Module. Use this feature to turn lights
on and off while you are away from home.
