RadonFTLab RadonEye Plus 2 User Manual Download

Page: 1 / 14

FCC ID : 2AC7Z-ESPWROOM02
FCC ID : QECGWBMD0X
FCC ID : 2ASCLRD200P

Smart Radon Gas Monitor

RADONEYE +

Operation Manual

RD200P2

•Type : pulsed ion chamber

•First reliable data out : < 60min

•Data interval : 10min update (60min moving average)

•Sensitivity : 0.5cpm/pCi/l at 10pCi/l (30cph/pCi/l)

•Operating range : 10℃ ~ 40℃ (50°F ~ 100°F), RH < 80%

•Measurement range : 0.1 ~ 255 pCi/l (9,435 Bq/㎥)

* Environment reference value 4pCi/l (148 Bq/㎥)

•Precision : < ±10% at 10pCi/l

•Accuracy : < ±10% (min. error <±0.5pCi/l ) at 10pCi/l

•Interval of measurement value saving : 60 minutes

•Storage capacity : 1 year

•Power consumption : DC12 ± 0.1V, 0.1A ( Use 12V DC adapter)

•Size : Φ80(mm) x 120(mm)

•Display : 0.96 inch OLED

•Data communication : Wi-Fi (internet), Bluetooth

•Weight : 520g

•Altitude : Up to 2000 m

•pollution degree : 2

* Radon Eye Plus 2 is a function upgraded version of Radon Eye Plus that enhances

Wi-Fi setup convenience by adding BLE communication to previous Radon Eye Plus

products.

* In March 2019, the model name of RadonEye Plus2 changes from RD200P to

RD200P2.

Product Specifications

Descriptive labeling in accordance with Quality
Management and Safety Control Act for Industrial Goods.

Instrument type: RD200P2
Instrument name : RA
Kind : For home(indoor) use

Material : ABS

Manufactured date : Indicated separately

Manufacturer : FTLab

* Only the manufacturer or agency will inspect and supply

Country of manufacture : Republic of Korea
Questions : www.radonftlab.com

FTLAB succeeded in developing a real-time Radon
sensor in 2015, and also succeeded in mass production
in 2016, we launched RADON FTLAB.

503ho, 8, 330beon-gil,
Haebong-ro, Danwon-gu,
Ansan-si, Gyeonggi-do, Korea

FCC ID : 2AC7Z-ESPWROOM02
FCC ID : QECGWBMD0X
FCC ID : 2ASCLRD200P

① BLE access : Indicates it is connected with smartphone using BLE communication
② Shock detect sign : It appears when a shock or vibration from outside is sensed, and

the measurement stops at the time

③ Radon concentration : Measured value of Radon shown in 10 minute interval
④ Unit of measure : Shown in pCi/l or Bq/㎥. Unit can be changed by smartphone app.
⑤ Information display : SN, peak value, 1/2/7 day and month average, measurement time,

pulse count per 10 minute measurement (present value/last value)

Name and function of each part

BLE Access

Shock detection

Radon concentration

Unit

Information

RadonFTLab

pCi/l

SN : RD21705010123

Name and function of each part

Front

LED : Red LED flashes for 30 seconds when Radon value exceeds

reference value.

Green LED flashes when Wi-Fi connection is not normal.

Ventilation window

LCD : Information display window for Wi-Fi access, shock detection,
Radon concentration, etc.

Rear

Power

12V DC

Radon ?

1. Radon is a colorless, odorless and tasteless radioactive gas.

Radon, a gas originating from radium which is generated by the collapse of

uranium in soil, is everywhere on earth. It penetrates indoors mainly from the

ground or building materials. The gases that cause sick house syndrome and

other noxious gases luckily smell. Urban gas and LPG were deliberately

smelled. However, radon does not smell nor can be seen. And no matter how

many years have passed, it is constantly released from the wall, ceiling and

floor.

2. Radon is 8 times heavier than air and is easily concentrated in the house.

Radon has the half-life of 3.8 days and makes alpha decay. The alpha particle

emitted from radon has the smallest penetration power among the radiation

rays and can not penetrate even a single piece of paper, but its destructive

power is so great that the cells are damaged if they are directly impacted by

radon, even having a nickname of "silent murderer". This is why radon detec

tion sensor is absolutely needed in home.

3. Radon gas causes lung cancer.

Three causes of modern female lung cancer are passive smoking, ultrafine

particles and radon. When radon gas enters the lung through breathing, alpha

particles released from radon damage the lung cells. Since once destroyed

lung cells are not regenerated, prolonged exposure to high concentration of

radon gas will increase the likelihood of lung cancer. Therefore, the United

States Environmental Protection Agency(EPA) designated Radon as a must

be managed hazardous gas for healthy life.

- Accurate measurement value of the average radon level can be obtained when

the house is empty for 1 or 2 days.

- Reliable value can be obtained about 1 hour after start of the measurement.

- Radon concentration in the house is generally high at dawn and low at daytime,

so continuous measurement for more than 24 hours is necessary.

Precautions

•Please, Measure in an environment free from vibration.
•Shock or disassembly will cause the equipment to malfunction and will not

be included in the warranty. (the unit will display “ERR” message)
•Abnormal data can be measured when using near a strong electromagnetic

radiation source such as high voltage transmission line, subway line, Wifi
transmitter(1Meter or less), microwave oven(1M or less) ('OVER'

message)

•Use only indoors. No waterproof.
•Use the provided DC 12V adapter.
•Continuous use in an environment with relative humidity of 80% or

higher is prohibited.
•A warning message may be sent to the set mobile device when it is higher
than the set radon concentration.

•Proper operating temperature range is 10℃ ~ 40℃ (50°F ~ 100°F)

•The warranty period is one year after purchase.

<Radon concentration fluctuation graph>

Seasonal radon concentration

Winter

Autumn

Summer

Spring

Daily radon concentration

Day

Evening Day

Dawn

Precautions when using

Example of proper installation

· please, let the device where there is no ventilation
environment to check the area's usual radon status.

Prohibited

· Install at least 50cm apart from wall, window and floor.
· In general, proper places to install are on desk, table
in the living room, or on dining table in the kitchen.

Caution

1. For accurate measurement, close windows and doors tightly.

2. When Ra is connected to DC 12V adaptor, measurement

starts automatically.

3. After the power is on, the wait time (10 minutes) is indicated by ‘- -’.

When wait time is over, the measured values are displayed from

10 minutes later. Measurements are displayed in 10 minute interval,

and saved in 1 hour interval.

To start the device

C_device

P_device

ea
sured va

lue

12h

36h

Actual value

RadonFTLab

pCi/l

SN : RD21705010123

Precautions before using App.

This is the User's Manual for controlling Ra device made in
Radon FTLab. Please refer to the detailed manual on the Radon FTLab
website (http://RadonFTLab.com) for the equipment and PC program

manual.

• Since it is an application that operates on a Wi-Fi base, there may be

operational limitations.

• It works properly in Android 4.3 version or iOS 8.0 version or later

• If the distance between the device and the smart device increases,

the

connection may be lost.

• In the 5G Internet environment, there are restrictions in the use of the

product, so please use 2.4G.

• We recommend user to agree to the privacy policy during the app

setting stage for trouble-free data transfer.

• Bluetooth and GPS must be enabled before using

• The time in the area where the equipment is installed is applied to the

data recorded after app setting/direct connection. The factory

Bluetooth & GPS function of

mobile device should be

activated for

Ra setting

GPS

Bluetooth

RadonEye +

Ra is the world's first IoT smart radon detector that is used in connec

tion with web database based on WiFi. Therefore, Ra is suitable for

real-time radon monitoring and easy to create Real-Time Radon Map. Manufac-

turer, Radon FTLab provides web database, radon-net.com, which means the
user can access the data every time, everywhere by smart phone, tablet or
internet connected desktop PC.

The sensitivity performance of Ra is like a standard instrument. It is 20
times higher when it is compared with other general customer’s radon detector,

so the measurement data is fast and precise. Radon measurement data can be
recorded within 1 hour with below

10% error from starting time of measurement

and the data will be updated every 10 minutes so the user will get to know the

diminishing trend of indoor radon level just within 30 minutes by ventilation or
window open.

Ra has added temperature & humidity sensor and measurement time

recording and extended the measurement range to 255pCi / l.

Ra offers free web uploading service at least 2 years.

Measurement

Range

Precision

Accuracy

Data log

Display

Mobile control

Sensing factor

Time chec

ing

Web access

Mobile notification

Fi, Bluetooth

Radon

umidity

Temperature

0.1

255 pCi/l

9,4

Bq/㎥)

Model

RadonEye (RD200)

Ra (RD200P2)

luetooth

Radon

0.1

100 pCi/l

Bq/㎥)

< ±10

at 10pCi/l (3

Bq/㎥)

< ±10

(min. error <±0.5pCi/l)

1year(1hour interval)

6 inch O

< RadonEye VS Ra >

1. What should I do under condition of no Wi-Fi around available?

A : RadonEye Plus2 automatically starts measuring when power is simply connected, so all you need to do is just select 'Connected Devices'
menu in your smartphone application even if you don't have a Wi-Fi

2. Tell me how to set up an app. when errors.

2.1. RadonEye Plus2 you are trying to set is not on the list.

A (iPhone) : Switch Bluetooth off and on to update the list again.
A (Android) : Click the "Rescan" button to update the list again.

2.2. The Wi-Fi list displayed on the app. does not contain the desired Wi-Fi I’d like to connect to.

A : Click the ‘refresh’ icon to update the Wi-Fi list. for your reference, 5GHz Wi-Fi is not supported and will not appear in the list.

2.3. If 'Wi-Fi settings failed' is displayed when next button is clicked after entering the Wi-Fi information.

A : If the green LED on RadonEye Plus2 keeps blinking and Wi-Fi connection is not successful, please check if Wi-Fi password is entered

correctly and internet connection status of the Router.

2.4. If the message 'RadonEye Plus2 registration failed' is displayed when the button is clicked after entering the Wi-Fi information,

A : Smartphone should also be Internet-connected through Wi-Fi / LTE / 3G
Check the Internet connection status of the smart device and proceed with setting under this circumstance.

2.5. If other cases of setting failure

A : Check the Wi-Fi and GPS connection on your smartphone, then turn the device off and on and run.

3. How can I change RadonEye Plus2 wifi connection that’s been already set into previous wifi place?

A : If you have Wi-Fi in your environment, you can set it up again and use it easily by clicking ‘Main’-‘Sub Menu’-‘Network’

4. It continues to show the high concentration figure, Is it out of order?

A : In this case, leave it in a well ventilated location for about two days and try to measure the low concentration at veranda, indoor air quality,
and high concentration in sequence

Q&A

RADON NET

Ra provides Remote Radon Monitoring Network Service. You can

check radon value in the web browser by registering the registration key which

is given when you access the radon-net.com website when setting the app.

You can also check the local radon value at any time through Radon Map.

· My Devices

· Information

· Device Location

· Device Log (Graph)

· Radon Map

Sign In