RAC GmbH & Co. KG – P.O. Box 12 25 – 74899 Bad Rappenau
Phone + 49-7066-9006-0 Fax +49-7066-9006-50
Please read carefully the installation instructions before you start with the installation!
Installation instruction
KX-87 (VW Golf II and Seat Toledo)
KX-9x15
KX-87 Installer 2-way-coaxial loudspeaker 45 watt
art.no. 231551
KX-9x15
2-way-coaxial loudspeaker 60 watt
art.no. 231552
The factory location for the installation of the loudspeakers is provided and partly wired in the
dashboard and in the rear.
Safety regulations for the user...
...to avoid fire and risk of accident.
Our products are only suitable for users with
the necessary professional installation
knowledge
. The relevant safety regulations for bearing car body parts, instructions on the
vehicle safety inside, as well as the regulations of the competent vehicle manufacturer are
necessary to be observed.
Attention: Important operational notice, please take in consideration before installation.
•
The loudspeakers should
only
be operated with the
indicated rated power
.
•
The mix up of the connections woofer/tweeter will lead to the immediate distortion of
the tweeter.
•
The operation
without
crossover or with an
active crossover
would result in a
damage of the loudspeakers.
•
Make sure that the same polarity in loudspeakers, crossover and amplifier is
guaranteed. If the speakers were wired out of phase, an unnatural sound without bass
would be the result.
