Version 1.0 Date
：
29/08/2018
- 1-
www.raise3d.com
Manual Pro2-401 Nozzle Replacement Installation-V1.0
For the instructions on removing or re-installing the assembled hotend onto the extruder head, please
refer to the Manual Pro2
– 402 Hotend Replacement.
STEP 1:
Nozzle Removal
First remove the Silicone sock from the hotend.
Use an 8mm socket wrench to remove the old nozzle from the heating block.
To prevent damage to components of the hotend, DO NOT exert force on the throat tube. Hold the solid section of
the heating block during adjustments.
STEP 2:
Nozzle Installation
Insert a cleaning rod completely through the hotend and ensure that tube is completely clear of
blockages.
