1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Hot Food Table
Electric Exposed Element Open Well
models 3500
model 3513 shown with
optional casters
Standard Features:
• Die stamped raised sanitary rim pan openings in
stainless steel top
• Stainless steel body construction - no assembly required
• Thermostatic control for precise food temperatures -
one per well
• Stainless steel, full length plate shelf - 7" deep
• Stainless steel ends
• Full length, 8" wide NSF workboard
• 6" high adjustable legs
• Power cord
• Available for 120V, 208V, or 240 volt operation
Description:
Electric operated, stainless steel open shelving base hot food
table with 20 gauge stainless steel top, and individual die-
stamped 12" x 20" top openings. Individual thermostatically
controlled, electrically heated, open food wells (spillage pans
required for wet operation). Unit totally prewired to junction
box, power cord is supplied. 7" wide plate shelf & 8" wide NSF
workboard. Unit on 6" high adjustable legs.
Specifications:
UNIT TOP: Top to be one piece of die formed 20 gauge stainless
steel with 1 5/8" square nosing. Top stamped with individual
12"x 20" die formed raised perimeter openings. Unit fitted with
compliment of electrically heated, open food wells, individual
thermostatically controlled. Spillage pans required for wet
operation. Provided with 7" deep, removable 20 gauge stainless
steel plate shelf, and 8" wide x 1/2" thick, full length NSF
composition workboard.
FOOD WELLS: 12"x 20" electrically heated, open food wells,
individually and thermostatically controlled.
CONTROLS: Thermostatic controls for elements mounted on front
of 7" deep removable stainless steel plate shelf. Connections to
heating elements are located outside of heated zone to avoid
wiring deterioration. Individual food wells wired to common
junction box(es). Power cord is supplied.
UNIT BASE: Bottom shelf to be stainless steel with channel
bracing. Body ends to be stainless steel. Legs to be 6" high with
adjustable bullet foot. Legs mounted to full length channel frame
assembly on bottom of body assembly.
model
3512 3513
3514 3515
Options & Accessories:
Counter Protectors
Serving Shelves/Plexi Shields
Overshelves
Casters
Roll Covers
Adaptor Plates
Spillage Pans
Stainless Steel Back
Voltage Other than Standard On 3-5 Well Only
(cord & plug not supplied as standard with 3 phase)
Randell Hot Food Table, Page 3
Revised 02/05
