THE RATCHET RAKE
THE RATCHET RAKE
Multipurpose Loader Bucket Attachment
PRODUCT INFORMATION SHEET
US. PAT.
7287344
52” Ratchet Rake
Fits Buckets 45”-54” Wide
For Machines up to 60 HP
SKU 1125015
68” Ratchet Rake
Fits Buckets 60”-72” Wide
For Machines up to 60 HP
SKU 1125023
72” Ratchet Rake
Fits Buckets 66”-78” Wide
For Machines up to 90 HP
SKU 1125031
The Ratchet Rake is a patented multi-
purpose implement that quickly attaches
to tractor and skid loader buckets. The
combination of two separate rows of
teeth projecting outward and downward
enables this product to rip out thick
brush and vegetation like no other. The
unique ability to be effectively operated
in a forward or backward direction
makes the Ratchet Rake perfectly suited
for performing a host of other jobs
.
See video & more Info at:
www.RatchetRake.com
Universal Connection Hardware
Included with all Ratchet Rakes
PS-Protective Sleeve RM-Ratchet Mechanism
SC-Short Cable FH-Forged Hook
LC-Long Cable SH-Shackle
WH-Wire Hook (Hardware Pack 12 lbs
.)
What is a Ratchet Rake used for?
-Removing:
Rocks, Brush, Saplings, Other Vegetation
-Preparing:
Food Plots, Lawns, Vegetable Gardens
-
Maintaining:
Driveways, Walking Paths, Fire Breaks
-Cleaning up:
Storm Debris, Dumpsites, Demolition
PRODUCT INSTALLATION
*Before installing the Ratchet Rake, follow
product set-up
instructions on the reverse side
1.
2.
3.
4.
5.
Machine is slowly pulled
forward until bucket edge
fully engages the Ratchet
Rakes upper connection
brackets. Bucket is then
slightly tilted upward.
Place a 4” block under
the front of the Ratchet
Rake. Use the shackles
to attach the steel cables
to the holes in the lower
connection brackets.
Connect the other ends
of the steel cables to the
wire hooks. The straps
are routed around the
bucket in a straight direct
line toward the upper
connection brackets.
The forged hooks are
attached to the upper
connection brackets. The
ratchet mechanisms are
tightened with 50 to 75
lbs. of force applied to
the handle.
The safety locks located
on the ratchet mecha-
nisms are pulled away
from the ratcheting gears.
This allows the handles to
be pressed inward and
locked down.
Thousands
of satisfied
customers
