Quick Reference Card: SL70 and SL70RC PLUS Series Radar Displays
86078_1
Soft Key Labels:
Change when you press a key.
Default soft key labels are shown.
MULTI
Controls guard zone alarm sensitivity, and tuning the receiver.
Also controls display lighting and contrast (monochrome) or brightness
(color).
- Press to display sliders.
Monochrome
Select a slider using the soft key or trackpad.
Toggle between Auto/Man or off/on by pressing key again.
Adjust slider using trackpad, and press
ENTER
to finish.
Color - Press and hold MULTI key for brightness to 100%.
MARKS / MOB
Controls placing marks, and Man
Overboard function.
- Press to place mark at cursor position, and use trackpad
to move mark. Press
ENTER
to finish.
- Press and hold for 2 seconds to activate or cancel MOB.
VRM/EBL
Used to measure range and bearing to/between targets.
- Press to place VRM/EBL if one not already placed.
Adjust position using trackpad, and press
ENTER
to finish.
- Press to display soft keys if VRM/EBL already placed.
D3994-6
GAIN
Controls display adjustments.
GAIN controls for background noise (speckle).
SEA controls sea clutter.
RAIN controls rain clutter around the vessel.
FTC controls rain clutter at a distance.
- Press for soft keys display.
RANGE
Controls range scale. Range scale and range rings are
shown in the Status Bar.
- Press top of key to increase the range scale.
- Press bottom of key to decrease the range scale.
- Press and hold to change the scale faster.
Select a slider using the soft key or trackpad.
Toggle between Auto/Man or off/on by pressing soft key again.
Adjust slider using trackpad, and press
ENTER
to finish.
50%
O
F
F
75%
O
F
F
RAIN
SEA
FTC
GAIN
MANUAL
MANUAL
ALARMS
Used to control guard zones.
- Press to display soft keys.
Use soft key to toggle zone on or off.
Adjust size/shape using trackpad, press
ENTER
to finish.
GUARD 1
OFF ON
GUARD 2
OFF ON
Use soft key to toggle VRM/EBL on or off.
Press FLOAT to access float options for existing VRM/EBL.
Press VRM/EBL DATABOX to toggle data box display off/on.
FLOAT¬
VRM/EBL2
OFF ON
VRM/EBL1
OFF ON
VRM/EBL
DATABOX
OFF ON
Press soft key to display required setup menu, then use trackpad
to select option and soft key to change setting.
Press
ENTER
to close menu, and
CLEAR
to to finish.
MENU
Provides access to setup options.
- Press to display soft keys.
SYSTEM
SET UP¬
RADAR
SET UP¬
MARPA
SET UP¬
TUNE
O
F
F
A
U
T
O
25%
25%
ON
ALARM
LIGHT
CONTRAST
ALARM
ON
25%
TUNE
A
U
T
O
LIGHT
75%
DISPLAY
Controls display mode windows.
- Press for display mode and soft keys display.
- Press again to toggle through display modes, then
ENTER
.
- Press and hold for 2 seconds for full page radar display.
Press soft key to toggle window on/off, or return to full screen.
Zoom: Move Zoom box using trackpad, press
ENTER
to finish.
Press soft key to toggle window on/off, or return to full screen.
Zoom: Press ZOOM key to display zoom window options.
Move Zoom box using trackpad, press
ENTER
to finish.
SELECT
WINDOWS
WINDOWS
OFF ON
ZOOM
OFF ON
SELECT
WINDOWS
WINDOWS
OFF ON
ZOOM¬
Monochrome
Color
Trackpad
Controls cursor position on the screen, and also the sliders
and setup options.
Hold the trackpad down to move the cursor faster.
CLEAR
Cancels operation in progress and returns to the
previous display.
Deletes an object/function under cursor control.
ENTER
Confirms selection and (if appropriate) clears current
soft key labels. It either performs the selected task,
accepts changes, or leads to display of more options.
When cursor text is displayed, takes cursor control
of the object.
When arrow-head cursor symbol is displayed, drops
the object under cursor control.
Soft keys
Press to select option, or highlight option or slider.
Labels change when you press soft/dedicated key.
Elipses (...) after the text indicate that pressing soft
key leads to a further display of soft key options.
POWER
Press and hold until unit beeps to turn on display.
Press to toggle between Standby and Transmit.
Press for 3 seconds to turn off display.
86078_1.book Page 1 Tuesday, February 26, 2002 2:55 PM
