Geschäftsführer: Dr. habil. Christian Perwaß, Dr. Lennart Wietzke
Ust-IdNr.: DE264446080 · Finanzamt Kiel-Nord
Förde Sparkasse · Konto: 1400055669 · BLZ: 21050170
BIC: NOLADE21KIE · IBAN: DE38 2105 0170 1400 0556 69
raytrix
GmbH
Schauenburgerstraße 116 · D-24118 Kiel · Germany
Telefon: +49 (0)431.5606-240 · Fax: +49 (0)431.26090065
info@raytrix.de
·
www.raytrix.de
TypeD R29 CameraLink Triggering Guide
Software setup
•
Make sure any old software for interfacing with the Camera is uninstalled (RxLive 2.8,
TypeD 2.8 camera drivers, TypeCL 2.8 FrameGrabber drives, ConvCam 3, ConvCam 4)
•
Make sure that the newest version of the Euresys MultiCam software for your Euresys
Grablink Full FrameGrabber is installed
•
Install the newest version of RxLive, CL Euresys FrameGrabber drivers and TypeD
camera drivers
•
Install the RxCalibData for your camera
Connecting the camera
•
Connect the camera using the two supplied CameraLink cables
•
Make sure the cables are connecting the camera and the FrameGrabber in the right
way:
