AV receiver/amplifier
AUDIO IN
R
L
(White) (Red)
(White)
(Red)
B. Using an Analog Audio cable
Connect an audio cable (not included) to the red and
white AUDIO OUT jacks on your player and to the AUDIO
IN jacks on your AV receiver or amplifier.
The picture noise appears “noisy” or degraded
• Your Player may be set to a HDMI resolution that’s higher than your TV’s. Change the resolution to match your
TV’s resolution.
Player doesn’t display video on my TV screen
• Select the appropriate video input mode on the TV so the picture from the Player appears on the TV screen.
• Make sure your HDMI cable or RCA cable is securely inserted in both the Player and your TV.
• Your TV may not support the resolution you have set on the Player. Change the resolution to match your TV’s resolution.
• The player’s HDMI OUT cable is not securely connected to your player or your TV.
I need to input text to manually configure log-in IDs, passwords or network settings, but I don’t see an
on-screen keyboard
• Try pressing the OK button on your remote control while the cursor is blinking on the screen’s entry field, this
should bring up an on-screen keyboard. Try adjusting the frequency range and channel of your network.
The Player has a poor or intermittent connection to the Wi-Fi access point (eg wireless router)
• The wireless communication may be interrupted from household devices that are using radio frequencies.
Move the Player away from them.
• The Access Point is located too far from the Player.
How can I check if my network connection is OK?
• Go to the Player’s Settings Menu, then select Network -> Network Test. This will test if you are successfully
connected to your Home Network and if your broadband connection is connected to the internet.
• Go to the Player’s Entertainment Menu, select VUDU Movies -> My VUDU -> Info & Settings -> Network Speed
Test. This will test the speed/performance of your network
The remote control does not work properly
Check the following:
• The batteries are inserted correctly.
• The batteries are fresh.
• The remote control is pointed directly at the remote sensor of the Player.
• The remote control is not being used from too far a distance from the Player.
• Nothing is obstructing remote sensor (located on front of the Player).
AV receiver/amplifier
OPTICAL IN
user manual
DSB778W
www.RCAav.com
Safety Precautions
1
2
3
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
HDMI, the HDMI logo and High-
Definition Multimedia Interface are
trademarks or registered trademarks
of HDMI Licensing, LLC.
Manufactured under license from
Dolby Laboratories.“Dolby” and the
double-D symbol are trademarks of
Dolby Laboratories.
General Controls Reference Guide
1.
POWER button
Press to turn on/off the player.
2.
RETURN button
Press to return to the previous screen.
3.
Audio button
Press to select the audio mode.
4.
/- buttons
Press to adjust the volume.
5.
Reverse Scan button
Press to fast reverse playback.
6.
A, B, C, D buttons
If a color-coded menu option appears on your screen,
you can press the corresponding color-coded button
to select this option.
7.
NETFLIX button
Press to access Netflix service directly.
8.
Mute button
Press to mute all sound.
9.
Home button
Press to display the main menu of the player.
10. , , , (Cursor) buttons
Press to select items or settings in on-screen
menus.
OK/ENTER button
Press to confirm or select menu items.
11.
Subtitle button
Press to display the subtitle menu.
12.
Play/ Pause button
Press to start playback.
Press to pause playback.
13.
Stop button
Press to stop playback.
14.
Forward Scan button
Press to fast forward playback.
15. VUDU button
Press to access VUDU service directly.
16. Pandora button
Press to access Pandora service directly.
1.
IR (remote control) sensor
2.
Status indicator
3.
DC IN power jack
4.
Analog
AUDIO OUT jacks
5.
Composite VIDEO
OUT jack
6.
Digital OPTICAL
OUT port
7.
HDMI
OUT jack
8.
LAN jack
A. Using an HDMI cable (for best connection)
Connect an HDMI cable (not included) to the HDMI OUT jack on your player and to the HDMI IN jack on your TV.
A. Using a Digital Audio Optical cable
(for best connection)
Connecting to a TV
Connecting to an Audio System
Connecting to Your Network
4
Powering up & Initial setup
5
Settings & Entertainment
Troubleshooting
A. Connecting your player to a wired router
A. Operating with the remote control
Open the cover and insert the batteries (AAA x 2) matching the polarity indicated inside battery compartment of the
remote control. To use, point the remote control at the remote sensor located on the front of the player. Please ensure
the front of the player is not obstructed. Do not expose the remote sensor of your player to a strong light source such
as direct sunlight or other illumination. If you do so, you may not be able to operate your player via the remote control.
B. Starting up & Basic setup
1. After all connections are complete, connect the power adaptor to your player.
2. If Player doesn’t turn on automatically within ten seconds, press
on the remote control to turn on your player.
3. Turn on your TV. Ensure your TV is switched to the input source that you’ve connected the player. (For details, refer
to TV’s user manual).
If the TV is connected by an HDMI cable, please allow a few moments for the opening screen to display.
4. The Player will display a basic setup screen which will guide you though initial setup.
Settings options
Network --> Info --> Quick Setup --> Display --> Audio
--> Language --> System
The main menu includes
Settings & Entertainment options. Press , , , to highlight an option, press OK/ENTER
to confirm your selection and setting , press
to return to previous menu.
Streaming video services (such as YouTube™, etc.) often stop, pause or “buffer” during playback
• Your Wi-Fi Access Point (eg wireless router) may be too far from the Player. If possible, try to
locate
your Wi-Fi
router closer to your Player, or use ethernet connection, or consult an expert on ways to improve your home
network’s bandwidth.
• Your broadband service speed may not be fast enough to stream video services. If so, your Internet Service
Provider (ISP) may have other service plans that provide higher bandwidth.
Player does not work
• Unplug the AC power adapter, wait at least ten seconds, then plug it back in.
• Ensure the AC adapter is securely inserted into the Player’s power jack and an AC outlet. The Player’s blue
power indicator should turn on within ten seconds of the Player’s AC Adapter being plugged in.
• See troubleshooting tips below.
My Wi-Fi network is not displayed on the “Network List”
• The access point or wireless LAN router may not broadcast its SSID.
- Manually enter your access point’s SSID in the Network Settings Menu of the Player.
- Or set your access point to broadcast its SSID.
• Your Wi-Fi network may not be set to the frequency range or range of channels that this Player can support.
Try adjusting the frequency range and/or channel of your network.
The Player has “frozen” or stopped working
• To reset the Player, unplug the AC power adapter, wait at least ten seconds, and then plug it back in.
• Make sure your Remote Control is functioning properly.
My Player seems to shut down by itself, is there a problem?
• No, in order to save you power, the Player will shut down after prolonged periods on inactivity - don’t worry,
it won’t shut down while you’re using it.” Note: you can disable this feature, or adjust the Auto Power Down
Duration by going to Settings -> System -> Auto Power Down
B. Using an A/V cable
Connect the yellow connectors on an A/V
cable (not included) to the VIDEO jack on
your player and the VIDEO IN jack on your
TV. Connect the red and white connectors to
the AUDIO OUT jacks on your player and L/R
AUDIO IN jacks on your TV.
Notes:
Do not tilt the connector when inserting it into the HDMI
•
jack, and make sure the shapes of the jack and the connector
are matched.
When using non-HDCP compatible TV, the image will not
•
display properly.
An HDMI cable carries both video and audio signals. If you want to use TV speakers,
•
you do not need to make an additional audio connection if you are using an
HDMI cable.
Notes:
Do not connect a modular phone cable to the LAN jack.
•
When plugging or unplugging the cable, hold the connector on the end of the cable. When unplugging, do not
•
pull on the cable. Press down the lock tab and pull the connector out of the jack.
B. Connecting your player to a wireless access point or router
C. Connection Status
To check your network connection status, select the Settings Option from Main Menu, then select
Network -> Network Test.
Note:
Do not place anything on the top of your player. Placing objects on the top of your player may interfere with the
wireless signal, or cause the player to overheat.
The lightning flash with an arrowhead symbol, within the equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to cause an electric shock.
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT PLACE
OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS UNIT.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
Limited warranty
AVC MULTIMEDIA (“AVC”) makes the following limited warranty. This limited warranty extend to the original
consumer purchaser and is limited to non-commercial use of the product.
One Year Parts & Labor Warranty
AVC products purchased in the United States are warranted to be free from defects in materials or workmanship for
a period of one year from the date of their original retail purchase. If the unit fails to conform to this warranty, we will
service the product using new or refurbished parts and products, at AVC’s sole discretion.
During a period of one year from the effective warranty date, AVC will provide, when needed, service labor to repair a
manufacturing defect at its designated Service Center. To obtain warranty service in the United States, you must first
call our
Customer Support Center at 1-800-506-5746 or 1-877-252-6873, during the hours listed in the box
below. The determination of service will be made by AVC Customer Support. PLEASE DO NOT RETURN YOUR UNIT
TO AVC WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements for defective parts or products
will be used for repairs by AVC at its designated Service Center for one year from the effective warranty date. Such
replacement parts or products are warranted for an additional one year from the date of repair or replacement. The
Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted
to make the necessary repairs. The customer is responsible for all transportation charges to the service facility.
Packaging and Shipping Instruction
When you send the product to the AVC service facility you must use the original carton box and packing material
or an equivalent as designated by AVC
.
LIMITED WARRANTY
Your Responsibility
1) You must retain the original sale receipt to provide proof of purchase.
2) These warranties are effective only if the product is purchased and operated in the U.S.A. or Canada.
3) Warranties extend only to defects in material or workmanship, and do not extend to any product or parts
which have been lost or discarded, or damage to product or parts caused by misuse, accident, improper
operation or maintenance, or use in violation of instructions provided with the product, or to product which
has been altered or modified without authorization of AVC, or to products or parts thereof which have had
the serial number removed or changed.
Out of Warranty
Important:
Also keep your "Bill of Sale" as proof of purchase.
Model no. ......................................................................................... Product name ..................................................................................
Type of set ........................................................................................ Serial no. ................................................................................................
Invoice no. ......................................................................................... Date purchased .................................................................................
Dealer name ..........................................................................................................................................................................................................
FOR SERVICE AND REPAIR, PLEASE VISIT www.RCAav.com
Specifications and external appearance are subject to change without notice.
In the event your product requires repair after the limited warranty period has expired, please contact our
Customer Support Center at 1-800-506-5746, 1-877-252-6873 or www.RCAav.com
Hours: Monday–Thursday: 9am–7pm, Friday: 9am–5pm, Saturday: 9am–NOON Eastern time.Important:
You are responsible for any transportation, shipping or insurance relative to the return of product to our
Product Returns Center.
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular
purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of
any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other
warranties, guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or
replacement of any parts. In no event shall AVC be liable for consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these
warranties in any manner whatsoever. The time within action must be commenced to enforce any obligation of AVC
arising under the warranty or under any statute, or law of the United States or any state thereof, is hereby limited to
one year from the date of purchase. This limitation does not apply to implied warranties arising under state law.
This warranty gives you specific legal rights and you may also have other rights, which may vary, from state to state.
Some states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the
exclusion or limitation of incidental or consequential damages, so the above provisions may not apply to you.
For more information on other products and services, please visit our web site at www.RCAav.com
The exclamation point within the equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in this owner’s manual.
Your player can be connected to your home network:
By connecting an Ethernet cable to the LAN jack on your player and to a wired hub or router. Using a wired network
•
provides the best performance, because the attached devices connect directly to the network and are not subject
to radio frequency interference.
By connecting the player to your Wi-Fi network.
•
Modem Cable
Modem Port
Wireless access point
©2011 AVC Multimedia Trademark(s) ® Registered Printed in China
811-778891W013
1
2
Accessories
• AC Adapter ................................................................. x1
• Remote Control(with batteries)
.............................
x1
FCC RF Radiation Exposure Statement :
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equip-
ment should be installed and operated with minimum distance 20 cm between the radiator and your body. End
users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must
not be co-located or operating in conjunction with any other antenna or transmitter.
CAUTION: Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because
their signals could interfere with critical aircraft instruments.
HDMI IN
High
Definition
TV
3
4
5 6
7
8
CAUTION: Danger of explosion if battery is
incorrectly replaced. Replace only with the
same or equivalent type.
Unit
Remote Control
To Install Batteries
2.
Insert two AAA
batteries.
1.
Open the battery door.
Battery Replacement
When the batteries become weak, the operating
distance of the remote control is greatly reduced and
you will need to replace them.
Notes:
• If the remote control is not going to be used for a
long time, remove the batteries to avoid corrosion
damage caused by battery leakage.
• Do not mix old and new batteries. Do not mix
ALKALINE, standard (CARBON-ZINC) or rechargeable
(NICKEL-CADMIUM) batteries.
• Always remove batteries as soon as they become
weak.
• Weak batteries can leak and severely damage the
remote control.
• WARNING: Do not dispose of batteries in a fire.
Batteries may explode or leak.
Wi-Fi Streaming Media Player
with 1080p HDMI output
It's important to read this instruction prior to using your new product for the first time.
Connect a digital audio optical cable (not included) to the
OPTICAL OUTPUT on your player and to the OPTICAL INPUT
on your AV receiver or amplifier.
Need More Help?
Please visit online help at http://www.RCAav.com
EN - 1
EN - 2
EN - 3
EN - 4
EN - 5
EN - 6
Connect an Ethernet cable to the LAN jack
on the back of your player and to an Ethernet
jack on a hub or broadband router.
Settings: Use to define your basic settings to your
preference. To return to a previous screen, press
.
Your player has an integrated Wi-Fi device and
antenna. No physical connection to the wireless
router is necessary. Place your player within range
of your wireless network. During configuration
of your player for network access, you may need
to enter a password if your network has security
turned on.
Unit
AUDIO IN
R
L
VIDEO IN
Standard
Definition
TV
(White)
(White)
(Red)
(Red)
(Yellow)
(Yellow)
Important Information Relating to Network Services
All information, data, documents, communications, downloads, files, text, images, photographs, graphics, videos,
webcasts, publications, tools, resources, software, code, programs, applets, widgets, applications, products and
other content (“Content”) and all services and offerings (“Services”) provided or made available by or through
any third party (each a “Service Provider”) is the sole responsibility of the Service Provider from whom it originated.
The availability of and access to Content and Services furnished by the Service Provider through this device
are subject to change at any time, without prior notice, including, but not limited to the suspension, removal
or cessation of all or any part of the Content or Services.
Should you have any inquiry or problem related to the Content or Services, you may refer to the Service
Provider’s website for the most up-to-date information. AVC Multimedia
is neither responsible nor liable
for customer service related to the Content and Services. Any question or request for service relating to the
Content or Services should be made directly to the respective Content and Service Providers.
Please note that AVC Multimedia is not responsible for any Services provided by the Service Provider or any
changes to, removal of, or cessation of such Services and does not warrant or guaranty the availability of or
access to such Content or Services.
Entertainment: This gives you access to many applications
and services. Some of the services may require a log-in
ID and password, some of the services may require a
subscription. The Player will provide you with on-screen
instructions if a log-in ID or password is required.
LAN
WAN
LAN
1
2
3
4
5
Internet
LAN cable
LAN cable
Networking equipment
(modem, etc.)
Hub or broadband router
1
8
2
9
10
11
12
13
14
15
16
3
4
5
6
7
