USB Connector ARM
Extending the USB Connector ARM:
1. Rotate the LCD screen 180
o
to show the USB Connector ARM.
2. Rotate the USB Connector ARM 180
o
to extend it.
3. Replace the LCD screen.
•
Refer to “Connecting to a PC” overleaf for more information.
•
Use USB Extension Cable (provided) if USB Connector ARM is obstructed or space does not
permit connection to PC.
•
Reverse the steps above to retreat the ARM.
1. Push (to the right) and hold the front cover
lock at the bottom of the camcorder.
2. Slide the front cover down and then lift up to
open.
3. Replace or install 2 AA batteries.
• Make sure you align the battery polarities as
indicated.
• In the case of low battery, a low battery icon
(
) will fl ash on the screen. Please change
batteries when battery icon is fl ashing.
• Alkaline batteries are recommended for best
results under normal use. For extended video
shooting, Energizer e2 Lithium AA batteries
are recommended.
4. Replace the front cover and slide up to lock.
v1.0 (EN)
5. Using your camcorder
Turn on/off
1. Press and hold
ON/OFF
to turn on.
2. Press and hold
ON/OFF
to turn off .
•
Camcorder will automatically turn off after 2 minutes if not in use.
Record
Press and release the red RECORD button (after
“READY” appears on the screen) to begin recording.
While recording:
• A red and the elapsed time appears at the top
left corner of the screen.
• The red recording light on the camcorder front
turns on.
Pausing a recording:
• Press
PLAY/PAUSE
.
• A pause indicator
II
replaces the red at the top
left corner and “Recording Paused” fl ashes in the
middle of the screen.
• To resume recording, press and release
PLAY/
PAUSE
again.
Stop
While playing or recording, press and release the red
RECORD button to stop the playing or recording.
Play
1. Press
PLAY/PAUSE
to start playback of the most recent recording or the selected video.
To select another video, refer to
Selecting videos
.
2. Press and hold
PLAY/PAUSE
for three seconds to play all videos.
•
If no video is selected after playback has fi nished, recording mode will resume after 5 seconds.
Search forward/backward:
• Hold
down to fast forward the selected video during playback.
• Hold down
to fast rewind the selected video during playback.
Pausing video playback:
• Press
PLAY/PAUSE
to pause playback (a pause indicator
II
and the remaining playback
time fl ash at the top left corner of the screen).
• Press
PLAY/PAUSE
again to resume playback.
Selecting videos:
• Press and release to cue the next video.
• Press and release
to cue the previous video.
Delete
1. Press
DELETE
and the last recording and “DELETE VIDEO ?” appear on the screen.
• To select another video, refer to
Selecting videos
.
2. Press and hold
DELETE
until the selected video is deleted.
3. To delete all videos, press & hold
DELETE
for 3 seconds and then repeat step 2.
Take photo
• Press and release
WEB PHOTO
to take photo (photo resolution: 1280 x 960 pixel).
Zoom
Before or during recording:
• Press
+
to zoom in.
• Press
–
to zoom out.
Volume
During playback:
• Press
+
to increase volume.
• Press
–
to decrease volume.
Recording indicator
Camcorder strap hole
Tripod screw mount
Video quality selector
HQ: High Quality mode
webQ: Web quality mode
• The selected setting (HQ or webQ) appears on the display screen during recording.
• The HQ setting is recommended when planning to view video on a TV directly from the
camcorder.
Settings
HQ
webQ
Quality
Near DVD
GOOD
Approximate recording duration*
2 hours
8 hours
* Recording duration is based on 4 GB microSD card. Actual recording
capacity depends on type of video content being recorded.
LCD screen
For self recordings, the LCD
screen can be rotated 180
o
.
Front cover
Refer to
Battery installation
for more
information.
Microphone
Lens
Back view
Front view
Left view
Bottom view
AV output
Audio/Video output for connecting to TV or other
AV equipment with the included AV cable.
•
Refer to “Viewing videos on TV” and “Recording videos to VHS
tape or DVD” overleaf for more information.
Audio speaker
Front cover lock
1. Press or to shift among month, date, hour and minute and press
+
or
–
to set the
date/time values.
2. Press or to select
DONE
and then press the red RECORD button to save settings. Or
press
DELETE
to exit without saving.
• Date and time setting can be accessed by pressing and holding
PLAY/PAUSE
and
ON/OFF
together while the camcorder is turned off .
1
2
3
• A microSD memory card is included and already inserted in the camcorder.
It is installed between the batteries in the front compartment.
• To remove card, push card in until a click is heard and the card will pop
out slightly, then remove the card.
• To insert card, align card with Card Symbol on camcorder and slide in until
a click is heard. The card icon ( ) appears on the screen with memory
card inserted.
1
2
3
4
Right view
EZ208
RCA Small Wonder Camcorder
www.rcaaudiovideo.com
Congratulations on purchasing your new RCA High Defi nition Small Wonder Camcorder.
Please read these instructions for quick tips on using the product.
User Manual
1. Content of the box
• SmallWonder
Camcorder
• AV
cable
• USB
cable
• 2 x AA Batteries
• Wrist
strap
• Carrying
Case
• User
Manual
• Owner Registration card
• 4GB microSD card (installed in the
camcorder)
2. Battery Installation
4. Setting date and time
3. Inserting microSD memory card
Front compartment
microSD card
