background image

Congratulations on your choice of a Real Good Toys product.  Your kit has been precision made with meticulous 

care by our craftspeople using carefully selected materials.  This Dollhouse will last for years, even generations, 

if heirloom care and attention is given during assembly.  Take your time and read the instructions completely.     

If you have questions, ask the experts at your local Dollhouse store or at info@realgoodtoys.com

Measure and identify the parts

:  

The kit is packed in 

groupings that protect the parts, and that is how the Parts 

List is organized.  As you measure and identify the parts, 

label them with sticky notes using the names from the 

parts list, and check them off the parts list so you know 

you have everything.  Taking the time now to identify and 

organize the parts also makes them familiar so you will 

understand what the instructions intend as you read ahead.

• Plan ahead so you know where you are going

• Read ahead so you know how to get there

• 

Paint ahead so the parts will be ready when you need them

Instructions for 

Real Good Toys’

the 

 Beachside Bungalow

 Kit #B 1895

©

01/17

Before you begin - 

You have already opened the box and 

see all the parts organized in boxes and bundles.  For the 

moment, keep them that way.  There are important things 

to do before you open your glue bottle.

Choose your color scheme

.  

Look at houses in your 

community, models in your local Dollhouse shop or at our 

website: realgoodtoys.com; look at plan books from a paint 

store or architectural books at your library (a favorite is: 

Painted Ladies by Michael Larsen and Elizabeth Pomada).  

You will be painting some of the parts right away so get the 

paint now.  Choose high-quality interior semi-gloss latex 

enamel paints for ease of use and durability.

Prepare your space

:  

This dollhouse 

will spread out over a large area while 

it is being built.  You will need a large 

flat tabletop for the house, several 

boxes to keep parts organized until 

they are needed, and several trays 

lined with waxed paper for hold-

ing small parts like windows and 

railings.  A snap-lid box will 

keep your tools and supplies 

handy between building 

sessions.

Tools and Supplies:

   

Tape measure or ruler,  Pencil, Sticky notes

 (like PostIts®)

White glue

 (like Aleene’s Tacky Glue®) 

for all construction

Solvent-based Panel Cement

 

for shingles

Masking tape,  Utility knife or coarse file

Fine tooth saw (razor saw

 (like X-Acto®) 

or a hacksaw)

Painting Supplies,  Sandpaper

 (especially 320gr)

Waxed paper

PostIts

®

, Aleene’s

®

, and X-Acto

®

 are registered trademarks of their manufacturers 

and have no affiliation with Real Good Toys

Not suitable for children under 13 years of age

California 93120 compliant for formaldehyde phase 2

Options

www.realgoodtoys.com or  your miniature dealer

  6888:  the 

“Best 1”

 Dollhouse Electrical Kit

  Stucco Grit: Paint additive for foundation texture

  Dye-1:  Brown shingle dye

  Dye-3:  Grey shingle dye

   SC: 

Copper flashing

  1015:   6-panel interior doors for Dividers

J-FK  Interior finishing materials: Baseboard 

and crown moldings & stairway 

 

banisters and landing rails.

This kit will accommodate 1” Scale furniture

Real Good Toys 

 122 Gallison Hill Rd 

 Montpelier, VT 05602 

 802 262-6018 

 www.realgoodtoys.com

Summary of Contents for B 1895




























Reviews: