background image

InstalIation Instructions

©

2016 Rear View Safety Inc.

Product Manual

RVS-778607

Warranty

One Year Warranty

Warranty Performance

Warranty Disclaimers

Rear View Safety Inc. warrants this product against material defects for a period of

one year from date of purchase. We reserve the right to repair or replace any such

defective unit at our sole discretion. Rear View Safety Inc. is not responsible for a

defect in the system as a result of misuse, improper installation, damage or mis-

handling of the electronic components. Rear View Safety Inc. is not responsible for

consequential damages of any kind.

DURING THE ABOVE WARRANTY PERIOD, SHOULD YOUR REAR VIEW

SAFETY PRODUCT EXHIBIT A DEFECT IN MATERIAL OR WORKMANSHIP,

SUCH DEFECT WILL BE REPAIRED WHEN THE COMPLETE REAR VIEW

SAFETY INC PRODUCT IS RETURNED, POSTAGE PREPAID AND INSURED, TO

REAR VIEW SAFETY INC. OTHER THAN THE POSTAGE AND INSURANCE

REQUIREMENT, NO CHARGE WILL BE MADE FOR REPAIRS COVERED BY THIS

WARRANTY.

NO WARRANTY, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, OTHER THE

ABOVE WARRANTY IS MADE WITH REGARD TO THIS

DISCLAIMS ANY IMPLIED WARRANTY OR

MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE AND

.

L

L

A

H

S

T

N

E

V

E

O

N

N

I

.

S

E

I

T

N

A

R

R

A

W

R

E

H

T

O

L

L

A

LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE

DAMAGES OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR

DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE

OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY

CLAIMS FOR LOSS OF PROFITS.

.

REAR VIEW SAFETY INC.

REAR VIEW SAFETY INC.

REAR VIEW SAFETY INC

This warranty is void if: defects in materials or workmanship or damages result from

repairs or alterations which have been made or attempted by others or the

unauthorized use of nonconforming parts; the damage is due to normal ware and tear,

this damage is due to abuse, improper maintenance, neglect or accident: or the

damage is do to use of the Rear View Safety Inc. system after partial failure or use with

improper accessories.

IMPORTANT NOTICE

Please read this manual before proceeding

installation

With this manual you will

be able to properly install

and operate the unit.

The Backup Camera

System is intended to be

installed as a supplement

aid to your standard rear-

view mirror that exist in

your vehicle. The Backup

Camera System is not

intended for use as a

substitute for rear-view

mirror or for any other

motor vehicle

equipment

required to be installed

by law.

.

Congratulations

Installation Location

on your

purchase of a Rear View

Backup Camera System.

Your Backup Camera System is

designed to provide you with

many years of trouble-free.

In some jurisdictions, it is

unlawful for a person to

drive a motor vehicle

equipped with a

TV viewer or screen located

forward of the back of the

driver's seat or in any

location that is visible,

directly or indirectly, to the

driver while operating the

vehicle.

In most jurisdictions, it is

unlawful for a person to

drive a motor vehicle

equipped with a

TV, TV monitor or screen

located forward of the back

of the driver's seat

or in any

location that is visible, directly

or indirectly, to the driver

while operating the vehicle.

.

Installation

Video (in)

Camera

-12V

Power (in)

To automatically have the camera & monitor turn ON when

vehicle activates, Simply connect the red power line 12V+ to

ignition power which can be an accessory switch/fuse line &

the black power line to ground.

To automatically have the camera and Monitor turn ON only

when vehicle goes in reverse. Simply connect the Camera's

red power line 12V+ to the vehicles reverse tail lights and the

black wire to Ground. Connect 15' RCA video cable Cameras

side and Monitors Side and than attach Monitors Red power

line 12V+ to reverse gear which can be an accessory

switch/fuse line and the black wire to ground.

Mount the camera adjust the lens of the camera to its position.

Connect power cord 12+ (red) and 12V- (black) to your vehicles

DC12V power system. Connect the video output (yellow) of the

camera to the display in your vehicle.

. Monitor accepts 2 video inputs

(white and Yellow cables ) to alternate between inputs cut

power to either input.

White RCA cable (plug)

is also a "VIDEO IN" cable

A   S a f e   F l e e t   B r a n d

Backup Camera System with License Plate Camera 

and 3.5" Display

Summary of Contents for RVS-778607









Reviews: