Recon Robotics Scout XL User Manual Download

Page: 1 / 10

Warranty

The Manufacturer’s Warranty documentation is available by email request from

support@reconrobotics.com

Updated Manuals and Translations

For the most current version of this manual, along with all available translations of
this manual, please visit our website at www.reconrobotics.com

To Request Service or Repairs

Call or e-mail your ReconRobotics representative or reseller to describe the
problem you are experiencing and request a Return Material Authorization (RMA)
tracking number. In addition to your original sales receipt, you will need to provide

the unit's serial number, your return shipping address, email address and a daytime
telephone number.

ReconRobotics, Inc

5251 W 73rd Streeet, Ste A

Edina, MN 55439

Phone: 1-866-697-6267 or 952-935-5515

Fax: 952-935-5508

Website: www.reconrobotics.com

For customer service, call 866-398-1921

Or email support@reconrobotics.com

Warranty and Service

Recon Scout XL

User Manual

Version 1.03 November 2016

R001261

Saving Lives at the Tip of the Spear™

Summary of Contents for Scout XL











Search results

Summary of Contents for Scout XL

Reviews:

Related manuals for Scout XL

Brands by name

Popular brands

Recon Robotics Scout XL, User Manual

Search results

Summary of Contents for Scout XL

Reviews:

Related manuals for Scout XL

Brands by name

Popular brands