background image

Ceiling Mount LED 

Exit Sign

Installation Instructions p.1

Red Arrow Trading

Elsworth House, Herries Road South 
Sheffield, S6 1QS

T:

 0800 195 0006     

F:

 0870 043 3946      

E:

 sales@redarrowtrading.com      

www.redarrowtrading.com

For models: HTLEDCM

Specification

• 

Ceiling Mount LED Exit Sign

• 

240V

• 

2W

• 

13pcs of SMD 2835 White LEDs

• 

40-50 Lumen output

• 

2.4V 900mAh Ni-Cd Battery

• 

1 Year guarantee

• 

IP20

This installation must be carried out by an electrician. 
Please read these instructions carefully before installation. 
Leave a copy for the user/maintenance engineer for future reference.

Structure Diagram

1.

 Indication light for charging.

2.

 Indication light for main function and error. 

3.

 Indication light for mains power. 

4.

 Test switch. 

Terminal Block Instruction

  L.

 AC220V connect the live wire

  

E.

 Connect the earth wire

  

N.

 AC220V neutral wire

Brief Introduction

This product is suitable for use in buildings such as hotels, 

restaurants, supermarkets and other public buildings with fire 

protection systems. It can be used to indicate directions for an 

exit or passage as well as to indicate storing locations of fire 

safety products and dangerous materials. It can also be used 

for emergency evacuation or fire protection.  

Functions and Features

This product is made with high quality LEDs, which features 

clear soft light, less power consumption and long working 

life expectancy. As a result, it is regarded as an upgraded 

replacement of normal exit lights with fluorescent tubes. It 

is a continuous working emergency evacuation indication 

light, assemblied with fully sealed nickel cadmium battery 

and good electronic components. Its circuit has a function of 

over charge and over discharge protection which can protect 

the battery from damage and extend its lifetime greatly by 

preventing the voltage from dropping to the limited value 

when discharging.   

Operation

1. 

When this product is connected to the mains power supply, 

    the green mains indicator and the red charging indicator 

    automatically turn on. When the light is fully charged, the 

    luminaire will light normally, while the red indicator 

    automatically turns off. Press the test switch, the luminaire 

    will flash for a short time and will remain on if it is 

    working correctly. 

2. 

When the AC power is suddenly shutdown, the luminaire 

    remains on. Press the test switch for about one second, the 

    luminaire turns off. Press the test switch for half second, 

    the luminaire turns on. 

Reviews: