Important please read all instructions carefully before installing your
XHO-K15 LED ADD-ON KIT:
The complete ADD-ON KITS weight approximately 2 lbs. Reef Brite has
gone through great care to ensure that the XHO-K30 LED ADD-ON KIT
installs seamlessly to your fixture. Due to various tank sizes/glass
thicknesses and older style mounts offered, before installing it is very
important that you check your tank manufacturers specs as well as
checking the mount you are using to ensure that it is compatible and can
support the additional weight. Reef Brite will not be responsible for
improperly installed kits or any damages that may result.
If you have any questions before or during the installation of your kit, please contact
joy@reefbrite.com and one of our customer service representatives will be glad to assist
you. For faster service please provide your phone number and a good time to call. Thank
you
Installation instructions for RMS mounts:
When working near or around your aquarium make sure all working surfaces are
completely dry before handling any electrical equipment.
Make sure your fixture is unplugged from electrical outlet and
disconnected from the power supply before attempting to install the XHO-
K15 kit.
If fixture was in use even for just a short period let cool.
LED’s can get very hot
during operation and can cause personal injury or damage surfaces if
proper care in handling is not taken.
Once cool, place fixture on a secure table or work surface.
Locate the four M5 x 12mm mounting screws included with your XHO-K15 kit.
These
screws are required to install the XHO-K15 kit.
Do not attempt to use hardware not supplied with your XHO-K15 kit as
damage to your fixture could result.
Attach the two brackets that came with your XHO-K15 kit by placing them
under
the
RMS mount on your XR series light so that the holes align with RMS mount and the
threaded holes on your fixture.
Using the provided hardware attach the brackets and mount to fixture.
It is
recommended to use care when threading the screws and avoid
overtightening the screws once installed.
