1.
HC5870
Use and Care Guide
When using an electrical appliance, basic precautions should always be observed,
including the following; read all instructions before using this appliance.
DANGER
To reduce the risk of electric shock:
■
Do not use in area that can be dropped into a sink or bath.
■
Make sure the power adapter and cord do not get wet. Do not plug or unplug the
appliance with wet hands.
■
Do not reach for an appliance that has fallen into water. Unplug it immediately.
■
Do not use while bathing or in the shower.
■
Do not place or store this appliance where it can fall or be pulled into a tub or sink.
■
Except when charging, always unplug this appliance from the electrical outlet
immediately after using.
■
Unplug this appliance before cleaning it.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
■
This appliance is for household use only.
■
An appliance should never be left unattended when it’s plugged in, except when
charging a rechargeable appliance.
■
Close supervision is necessary when this appliance is used by, on, or near
children or persons with special needs.
■
Use this appliance only for its intended use as described in this manual.
■
Do not use attachments not recommended by the manufacturer.
■
Keep the cord away from heated surfaces.
■
Never operate this appliance if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or if it has been dropped into water.
If any of these things happen, return the appliance to an authorized service
center for examination and repair.
■
Never drop or insert any object into any of the appliance’s openings.
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
■
Do not use outdoors or operate where aerosol (spray) products are being used, or
where oxygen is being administered.
■
Make sure the cord is disconnected from the clipper while storing this appliance
and
cord in a moisture-free area. Do not store it in temperatures exceeding
140°F (60°C).
■
Do not use this appliance with a damaged or broken cutter unit, as injury may
occur. Always make sure blades are aligned properly.
■
Always attach plug to appliance and then the adapter to the outlet. To disconnect,
turn all controls to OFF, then remove adapter from outlet, then detach power cord
from the dipper for storage.
■
Do not use an extension cord or a voltage converter with this appliance.
■
Do not wrap the cord around the appliance.
■
Dispose of batteries properly. Do not incinerate. Batteries may explode if
overheated. Do not wrap in metal or aluminum foil. Wrap in newspaper before
discarding. It is suggested that you contact local battery redemption site(s) in
your area.
Remington
®
hair clippers provide a quick and easy way to create
professional-looking haircuts. Developed to combine professional grade blades with
premium guide combs, this virtually indestructible hair clipper enables you to
achieve customized, modern looks and traditional hairstyles. To help you create
those styles, and to extend the life of your hair clipper, please read all instructions
before using.
Product Features
Register Your New Product Today!
By registering your new Remington
®
product, you will receive these important benefits:
Proof of Ownership • Product Protection • Product Registration • Special Offers
Register online at: www.RemingtonProducts.com
2.
1.
Clipper
2.
Left taper comb
3.
Right taper comb
4.
#0 - 1/16” (1.5mm)
5.
#1 - 1/8” (3mm)
6.
#2 - 1/4” (6mm)
7.
#3 - 3/8” (9mm)
8.
#4 - 1/2” (12mm)
9.
#5 - 5/8” (16mm)
10.
#6 - 3/4” (18mm)
11.
#7 - 7/8” (22mm)
12.
#8 - 1” (25mm)
13.
Neck brush
14.
Cleaning brush
15.
Barber scissors
16.
Blade guard
17.
Oil bottle
18.
Charger
19.
Barber cape
20.
Durable storage case
Removable Blade
■
Place blade guard onto the blades before removing.
■
To remove blade, hold the clipper with front of blade teeth facing away.
■
Push the blade cartridge out, using the thumb cut out on the back of the
clipper.
■
The blade can be easily brushed or rinsed for cleaning (see Cleaning
and Maintenance section).
To Install Blade
■
To reattach blade, slide cartridge back into clipper body.
■
When pushing blade back into position, ensure that you do not push on the
metal blades; there is a plastic portion of the blade cartridge that should be
pushed in.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
15.
14.
16.
17.
18.
20.
19.
Comb Guide Number:
Haircut comb:
0
1/16” (1.5mm)
1
1/8” (3mm)
2
1/4” (6mm)
3
3/8” (9mm)
4
1/2” (12mm)
5
5/8” (16mm)
6
3/4” (18mm)
7
7/8” (22mm)
8
1” (25mm)
Attaching Guide Comb
Hair Length Settings
1.
Guide combs should be installed by first hooking the blade teeth to front side
of guide comb. Then press the back of the guide comb down until it snaps into
place.
2.
Ensure comb is attached before beginning to cut hair.
3.
To remove, pull the snap tab on back side of guide comb and pull the comb off.
TM
