background image

HC6525

Use and Care Guide

DANGER 

To reduce the risk of electric shock:

 

Keep away from water. Do not use in area that can be dropped into a sink or bath.

 

Do not reach for an appliance that has fallen into water. Unplug it immediately.

 

Do not use while bathing or in the shower.

 

Do not place or drop into water or other liquid.

 

Do not place or store this appliance where it can fall or be pulled into a tub or sink. 

 

 

Unplug this appliance before cleaning it.

WARNING 

To reduce the risk of burns, fire, electric shock or injury to persons:

 

This appliance is for household use only.

 

Close supervision is necessary when this appliance is used by, on, or near 

children or persons with special needs or other disabilities.

 

Use this appliance only for its intended use as described in this manual. 

 

Do not use attachments not recommended by the manufacturer.

 

Keep the cord away from heated surfaces.

 

Never operate this appliance if it has a damaged cord or plug, if it is not working 

properly, if it has been dropped or damaged, or if it has been dropped into water. 

If any of these things happen, return the appliance to an authorized service 

center for examination and repair.

 

Never drop or insert any object into any of the appliance’s openings.

 

Do not use outdoors or operate where aerosol (spray) products are being used, or 

where oxygen is being administered.

 

Make sure the cord is disconnected from the clipper while storing this appliance 

and

 

cord in a moisture-free area. Do not store it in temperatures exceeding 

140°F (60°C).

 

Do not use this appliance with a damaged or broken cutter unit, as injury may 

occur. Always make sure blades are aligned properly.

IMPORTANT SAFETY 

INSTRUCTIONS

SAVE THESE INSTRUCTIONS

 

Do not use an extension cord or a voltage converter with this appliance.

 

Do not wrap the cord around the appliance.

Remington

®

 hair clippers provide a quick and easy way to create 

professional-looking haircuts. Developed to combine professional grade blades with 

premium guide combs, this hair clipper enables you to achieve customized, modern 

looks and traditional hairstyles. To help you create those styles, and to extend the 

life of your hair clipper, please read all instructions before using.

 Product Features

Register Your New Product Today!

By registering your new Remington

®

 product, you will receive these important benefits:

Proof of Ownership • Product Protection • Product Registration • Special Offers

Register online at: RemingtonProducts.com

 Blade Removal

 Attaching Guide Comb

Comb Guide

Length

       #0 Red

       1/16” (1.5mm)

       #1 Orange

       1/8” (3mm)

       #2 Yellow

       1/4” (6mm)

       #3 Light Green

       3/8” (9mm)

       #4 Green

       1/2” (12mm)

       #5 Teal

       5/8” (16mm)

       #6 Blue

       3/4” (18mm)

       #7 Dark Blue

       7/8” (22mm)

       #8 Purple

       1” (25mm)

Hair Length Settings

7

8

9

10

11

13

12

15

16

17

14

2

1

3

4

5

6

 1.

 Blade set

 2.

 Vacuum intake

 3.

 Easily removable vacuum chamber 

 4.

 Vacuum chamber release button 

 5.

 On/off switch

 6.

 Power indicator

 7.

 Nine length guide combs

 8.

 Neck brush

 9.

 Left and right ear combs

 10.

 Three sectioning clips

 11.

 Scissors

 12.

 Blade cover

 13.

 Barber comb

 14.

 Oil bottle

 15.

 Fade guide

 16.

 Neck liner

 17.

 Cleaning brush

 18.

 Travel pouch (not shown)

1.

  Unit must be off. Hold unit securely in 

one hand. Grip blade and push with 

your thumb the top of the blade away 

from the unit.

2.

  Use enough force to move the blade 

off the retaining snaps and rotate 

blade off bottom tab.

3.

  Pull blade away from unit. Reverse 

order to reattach blade.

Note:

 This clipper is not intended for professional use.

Before Cutting Hair

1. Make sure your hair clipper is operating correctly.
2. The vacuum feature will not function properly if the hair chamber is removed.
3. The person should be seated so that the top of his head is at your eye level.
4. Comb the hair as it is normally styled.
5. Comb out all knots and tangles.
6. Ensure the hair is dry. Hair clippers perform best with dry hair, making it easier to 

see how much hair is being cut.

7. Hold the hair clipper in the palm of one hand with your thumb resting firmly on 

the top of the hair clipper. This grip provides comfortable cutting control.

Giving A Comfortable, Even Cut

■ 

Allow the clipper to cut through the hair without moving 

it too quickly. Moving the clipper too quickly may create a 

pulling sensation. As the clipper cuts the hair, the vacuum 

sucks the clippings through the inlet into the hair chamber.

■ 

Use short strokes when cutting, and initially use the longest 

trimming guide. You can always use a closer trimming guide 

later if you want a closer cut.

How to Give a Haircut

STEP 1 – Nape of the neck 

•  Set the comb to 3mm or 6mm.
•  Hold the clipper with the blade teeth pointing upwards. Begin 

starting at the centre of the head at the base of the neck.

•  Slowly lift the clipper, working upwards and outwards 

through the hair, trimming just a little at a time.

STEP 2 – Back of the head

•  With the comb set at 12mm or 18mm, cut the hair at the 

back of the head.

Using the fade guide:

 Work the fade guide, with the wider teeth 

upwards, into the hair from one side. Run the clipper over the 

guide to clip the hairs poking through. Keep the guide at the 

same height as you work your way around the head. 

 How to Use

1.

   Guide combs should be installed by first hooking the blade teeth to front side of 

guide comb. Then press the back of the guide comb down until it snaps into place.

2.

   Ensure comb is attached before beginning to cut hair.

3.

   To remove, pull the snap tab on back side of guide comb and pull the comb off.

STEP 3 – Side of the head 

•  With the comb set at 3mm or 6mm, trim sideburns. Then change to the longer 

9mm guide comb and continue to cut up to the top of the head.

•  To trim around the ears, remove the trimming guide and replace with either the 

left or right ear guide. The shorter guide teeth are designed to be toward the ear. 

Hold the ear forward to keep it out of the way. Move the clipper from the back of 

the head to the front. This creates a tapered effect around the 

ear and back of the neck.

STEP 4 – Top of the head 

•  With the 18mm or 22mm guide comb attached, cut hair 

on top of the head against the direction in which the hair 

normally grows.

Note:

 For longer desired lengths of more than 22mm, place 

finger over hairs and guide into the guide comb and blade to 

better guide the hair trimmings into the vacuum chamber. 

•  Always work from the back of the head.

STEP 5 – The finishing touches

•  The final trim can be made with the hair clipper or the 

included scissors. Make sure to check over the entire head 

for any uneven areas. For styled hair or giving quick trims, 

you may prefer using your hair clipper without the trimming 

guide.

•  Use the clipper without a guide comb for close trimming 

around the base and sides of the neck.

•  To produce a clean straight line at the sideburns, reverse the 

hair clipper. 

•  Place the reversed clipper at right angles to the head, tips of the 

blades lightly touching the skin and then work downwards.

Using the neck liner:

 With the handle side up, place and hold 

the neck liner just above where you want to create a clean 

trimming line. Use the clipper without a guide comb to trim 

the neck hairs up to the liner. 

Reviews: