manualshive.com logo in svg

resi-linx HD-4001 digi-mod, User Manual And Installation Manual

The resi-linx HD-4001 digi-mod is an innovative product designed for seamless digital video distribution. To easily configure and install the device, make sure to download the comprehensive User Manual and Installation Manual, available for free download at 88.208.23.73:8080. Obtain step-by-step instructions and unleash the full potential of this cutting-edge product.

Share
Download
background image

HD-4001DM User Guide and Install Manual

Page 1

HD-4001 Quad Input DVB-T HD Encoder/Modulator

User Guide and Install Manual

Table of Contents

Safety Precautions..........................................................................................................................................2

Package Contents ...........................................................................................................................................2

Product Description........................................................................................................................................3

Specification...................................................................................................................................................4

Installation......................................................................................................................................................5

Hardware Installations and Connections........................................................................................................5

Connecting to the GUI Interface:...................................................................................................................6

Encoder Programming and Setup via GUI Interface: ....................................................................................6

Overview Page of Zycast Encoder.................................................................................................................6

Common Setup...........................................................................................................................................7

RF Setup....................................................................................................................................................9

Encoder Setup ............................................................................................................................................9

Network Configuration ...........................................................................................................................11

Administration............................................................................................................................................12

Saving your configuration files....................................................................................................................12

Front Panel LCD Encoder Menu Map .........................................................................................................13

Modulator Configuration via Front Panel LCD...........................................................................................14

Network Setup............................................................................................................................................18

ASI Output .................................................................................................................................................18

EAS ...........................................................................................................................................................19

Summary of Contents for HD-4001 digi-mod





















Reviews:

No comments

Related manuals for HD-4001 digi-mod

Kawai CP150 Supplementary Manual preview
CP150
Brand: Kawai Pages: 3
JJB Electronics VTP-200 Installation Instructions preview
VTP-200
Brand: JJB Electronics Pages: 2
ABM 5050 Series Manual preview
5050 Series
Brand: ABM Pages: 14
UNITED OFFICE UAV 220 A2 Operating Instructions Manual preview
UAV 220 A2
Brand: UNITED OFFICE Pages: 35
Promate VitaQi-S4 User Manual preview
VitaQi-S4
Brand: Promate Pages: 4
Perel BG90017 User Manual preview
BG90017
Brand: Perel Pages: 40
MAAX 105760 Installation Instructions Manual preview
105760
Brand: MAAX Pages: 24
Warn Industries VR Installation And Operator'S Manual preview
VR
Brand: Warn Industries Pages: 26
Mixx Audio JX2 Quick Start Manual preview
JX2
Brand: Mixx Audio Pages: 10
GE IAC 12IAC80L-A Instructions preview
IAC 12IAC80L-A
Brand: GE Pages: 3
GE HFA51A Instructions preview
HFA51A
Brand: GE Pages: 4
Kendal SI-BM01 Quick Manual preview
SI-BM01
Brand: Kendal Pages: 2
Nilfisk-Advance 56600458 Installation Instructions preview
56600458
Brand: Nilfisk-Advance Pages: 2
Mannington commercial Edge Effects Installation Instructions preview
Edge Effects
Brand: Mannington commercial Pages: 3
aquaHabitats MicroHabitat 30 Instructions For Use Manual preview
MicroHabitat 30
Brand: aquaHabitats Pages: 32
Ducasa VITRO 750 Black Operation Manual preview
VITRO 750 Black
Brand: Ducasa Pages: 8
ABB REG650 ANSI Product Manual preview
REG650 ANSI
Brand: ABB Pages: 73
Wilwood Disc Brakes 140-8230 Assembly Instructions preview
140-8230
Brand: Wilwood Disc Brakes Pages: 5

Brands by name

Popular brands

Load more brands