Artemide inc.
1980, New Highway, Farmingdale (NY) 11735
T. +1 631 694 9292 | infousa@artemide.net | www.artemide.net
Artemide Ltd.
11105, rue Renaude Lapointe, Montréal (QC) H1J 2T4
T. +1 514 323 6537 | infocanada@artemide.net | www.artemide.net
1
BLISS 13
WALL/CEILING
Assembly instructions
rev 0.1
Attention: Read and understand these instructions before installing fixture. This fixture is intended for
installation in accordance with National Electric Code and local regulation: To assure full compliance with
local codes and regulations, check with your local electrical inspector before installation. This equipment
is guaranteed only when used as indicated in these instructions; Therefore they should be kept for future
reference. To prevent electrical shock, turn off power supply before carrying out any connection or
maintenance operations.
STEP 1
Make sure you have all the elements of the fixture
Your box should contain the following parts
ø5” J-Box Mounting plate
Universal plate
Complete Bliss
assembled to be mounted
STEP 2
Disasemble the fixture
1. Remove the two diffusers
2. Loosen nuts on the threaded pins
3. Remove the front plate
2.1
2.1
2.3
2.2
