OPERATING INSTRUCTIONS
FM-2ST FM MODULATOR
FM-2 is a frequency agile FM stereo modulator for FM broadcast band.
SELECT
MHz
LOCK
8 8
RF OUT
DOWN
DC IN
FM-2
FM Modulator
AUDIO IN
L/MONO
AUDIO IN
RIGHT
25570 TEIJO FINLAND
R F
TUOTE OY
15V 450 mA
74 mm
103 mm
INSTALLATION
FM-2 must be installed in a dry and locked room.
The modulator can be installed on the wall by using fixing
holes.
The dimension are shown in figure 1.
Sufficient air current must pass around the unit.
Figure 1.
Audio signal is connected to
AUDIO IN L/MONO
and
AUDIO IN RIGHT
connectors (RCA-female).
RF OUT
is connected to network via tap or combiner.
The modulator is supplied with the power supply, which is connected to
DC IN
connector.
LOCK
led is showing
the power is connected.
PROGRAMMING
FM-2 is programmed with the push buttons
UP, DOWN
and
SELECT
. In the Table 1. are the functions, which
can be programmed.