RFRemotech SuperbFire C32QS Quick Start Manual Download

Page: 1 / 6

SuperbFire C32QS

Wireless Radio Firing System V2.0

For Fireworks

RFRemotech Radio Frequency Remote Technology

Remote Control Products, Remote Controllable Service

Warning:

1. Only the person who has Fireworks licence is allowed to purchase the product, or the person of whom

there isn’t fireworks purchase limit in his/her country or district is allowed to purchase the product.

E-MadeinCHN is not with responsibility for any illegal usage.
2. If Channel Fire LED #6 keeps turned on when receiver is powered whenever Rocker Switch #15 is in any

position and in the same time Channel Test LED #5 is always off, the channel has been shorted out, don’t

use the channel any more, the receiver will fire e-match or igniter without any operation. It is dangerous

and may do damage to body!

Page 1 of 6

Summary of Contents for SuperbFire C32QS







Search results

Summary of Contents for SuperbFire C32QS

Reviews:

Related manuals for SuperbFire C32QS

Brands by name

Popular brands

RFRemotech SuperbFire C32QS, Quick Start Manual

Search results

Summary of Contents for SuperbFire C32QS

Reviews:

Related manuals for SuperbFire C32QS

Brands by name

Popular brands