DO NOT SLEEP ALL NIGHT USING A HIGH TEMPERATURE
THERAPEUTIC RECOMMANDATIONS
Insert White Connector from Controller
Biomat
MX
(QUEEN SIZE : L L / R R)
Insert electrical plug from controller into a
wall outlet electrical socket.
Turn on the Control Box Safety Switch by
pressing the button located on the right side of
the unit.
Press Power Button to Activate the Biomat
MX
If
you followed the above steps and the power is
still not on, repeat steps 1~4 again.
Temperature Up / Down
Sets the desired temperature of the Biomat
MX
.
You will see the light move up or down on the
indicator as you press the button.
TIMER :
Selects the length of time you want to use
the Biomat
MX
. The light will change to a
different time setting as you press the Time
Button on the indicator.
EMI(Elecrtomagnetic Interception) :
Blocks harmful Elecrtomagnetic and Water
Vein Waves that would otherwise emit from
the Biomat
MX
.
This light will come and stays on.
TEMPERATURE INDICATOR :
This light will come on and stays on as you
change the temperature control.
ALARM :
This light will appear if there is any
malfunction. Please contact the dealer.
Children, diabetics, invalids or paralyzed persons should be monitored at all times while mat is in use.
Never use high heat temperatures on children, or those who are pregnant or lactating. Avoid any heat
on infants.
Use a high temperature of (F 140¡-158¡ / C 65¡- 70¡) for only 20~60minutes per-day to relieve arthritis
pain and stress or for a relaxing sauna/detoxification.
Use a low setting of (F 95¡-113¡/ C 35¡- 45¡) for a good nights sleep, or use no heat(power on only) for
cool refreshing negative ions.
GENERAL
INSTRUCTIONS FOR THE
TM
BI0MAT
MX
Summary of Contents for Bio-Mat 7000 MX
Page 2: ......
