Optional accessories:
RDH L28 (not included):
With some frames and cassettes with
especially big sprockets, the clearance between the upper
pulley and the bigger sprockets can be reduced to the point of
impair the shifting performance on the lower gears. If you are
experiencing performance issues on the lower gears while using
your OSPW
+
, we recommend replacing the original bracket axle
unit of your derailleur with Ridea’s RDH L28 bracket axle unit to
improve clearance.
2
nd
Edition February 2019
RIDEA GROUP Limited
@CyclingRidea
www.rideabikes.com
service@rideabikes.com
TEL: +886 4 7715639
FAX: +886 4 7720539
Installation Manual
Rear Derailleur Cage (MD2 C48)
SHIMANO XTR M986 / XT M786 / SLX M675 10sp
OSPW
+
OverSized Pulley Wheel System
+
Turn the derailleur body clockwise and the OSPW
+
counterclockwise to return the derailleur to its resting
position. Please note turning directions to avoid any damage.
12
Reinstall the rubber ring to its original position.Reinstall the P-Cover
back to its place (press down to their original position the Cam
Unit and the Stabilizer Unit in case they impede placing the
P-Cover back) and use the 3 bolts to secure it (1-1.5 N
.
m)
11
Use 4mm hex wrench to tight both
pieces together (3.5-5.4 N
.
m). Hold
down the Cam Unit and the Stabilizer
Unit during the process so they hold
their position.
10
Reinstall the pulley cage stop screw
(1 N
.
m).
13
(Fix the limit screw)
Congratulations, your MD2 C48
OSPW
+
system is now installed!
14
