background image

Part No. SP7078 

Printed in Mexico

Wet/Dry Vacs

WET/DRY VAC PARTS

& ACCESSORIES

1-800-474-3443

Call Us 1

st

• Operation

• Warranty 

(See back cover)

• Technical Assistance

• Repair Parts

For any questions about:

Please have your Model Number and

Serial Number on hand when calling.

45 Liter / 12 U.S. Gallon

WET/DRY VAC

ASPIRADORA PARA MOJADO/SECO DE  

45 Litros / 12 Galones EE.UU.

MANUAL DEL USUARIO 

OWNER’S MANUAL

RT1200M0

DRAIN

DRA

IN

FOR QUESTIONS OR INFORMATION CONTACT US AT 

01-800-701-9811 FROM MEXICO 

For service parts visit store.ridgid.com/provacs

TABLE OF CONTENTS

*****************

ÍNDICE DE CONTENIDO

*****************

•  SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . 19
•  INTRODUCTION  . . . . . . . . . . . . . . . . . . . . . . . . . . 21
•  ASSEMBLY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
•  OPERATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
•  STORAGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
•  MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
•  REPAIR PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . 33
•  WARRANTY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

•  INSTRUCCIONES DE SEGURIDAD  . . . . . . . . . . . . . . . 2
•  INTRODUCCIÓN  . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
•  ENSAMBLAJE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
•  FUNCIONAMIENTO  . . . . . . . . . . . . . . . . . . . . . . . . . 9
•  ALMACENAMIENTO . . . . . . . . . . . . . . . . . . . . . . . . 13
•  MANTENIMIENTO  . . . . . . . . . . . . . . . . . . . . . . . . . 14
•  PIEZAS DE REPUESTO . . . . . . . . . . . . . . . . . . . . . . 16
•  GARANTÍA   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

ADVERTENCIA:

Para reducir el riesgo de lesiones, el usuario 

debe leer y comprender el manual del 

usuario antes de usar este producto.

GUARDE ESTE MANUAL  

PARA REFERENCIA FUTURA

WARNING:

To reduce the risk of injury, the user must 

read and understand the owner’s manual 

before using this product.

SAVE THIS MANUAL 

FOR FUTURE REFERENCE

SP7078 RT1200M0.indd   1

1/5/19   8:53 PM

Summary of Contents for RT1200M0





































Reviews: