background image

 

 

 

 

RLH Industries, Inc. • Tel. 866-DO-FIBER • Fax 714 532-1885 • www.fiberopticlink.com

 

Page 1

RLH Analog Phone & Data

Mux Over Fiber System

16 CHANNEL VOICE WITH DATA
OVER FIBER OPTICS

Introduction

The RLH  16  channel RLH Analog Phone & Data Mux Over Fiber 
System   provides  a  comprehensive   method  of  multiplexing 
analog  phone  (POTS)  channels over  a  single  pair of  multimode 
or single mode fibers in dual fiber models, or a single fiber in bi-
directional  fiber  models.     This  compact  single  rack  unit  (1RU) 
system solves  the problem  of  adding POTS lines when available 
fiber  is   limited,  reduces  equipment  space,  and  lowers   overall 
equipment costs.

The system also includes four  10/100M  Ethernet ports  for LAN 
interconnection, and  two  channels of  RS-232   or   RS-422/485 
data  ports.  2/4-wire E&M/Analog Data/Audio ports  are available 
options.  All  ports  operate  simultaneously  over  the  fiber  optic 
cable,  and  may  be  used  with  leased  lines  to  build  up  private 
networks and private telephone networks.

Key Features

Exclusive Unconditional Lifetime Warranty.

Low cost solution for delivering analog POTS lines over fiber 

Four integrated 10/100 Base-T Ethernet ports for LAN, VOIP, 

video over IP or other applications.

16 FXO/CO ports for connection to PABX or PSTN

16 FXS/Sub ports for connection of individual analog 

phones or faxes.

Ethernet switch is full/duplex, auto negotiation

Each voice channel is connected to a single RJ-45, using pins 4 

& 5,  and RJ-11 adapter cables are provided.

Supports call forwarding.

Available with ST, SC or FC connectors.

Optional ring down circuit over analog phone is available.

Includes one RS-232 or RS-422/485 port.

Available in Single or Multi-mode fiber, up to 120km fiber range.

EIA 19" 1RU rack mountable.

Convenient front panel LED’s monitor activity of analog phone 

and E&M channels.

Ethernet interface is AUTO-MDIX (auto crossover adapting)

Redundant power supply may be 12,

 

24 or 48VDC and/or 

115/240VAC local power

 (adapters included).

0˚C ~ 50˚C (0˚F ~ 122˚F) operating temperature rated.

2012A-0504

Specifications subject to change without notice.

Compliance Information

The RLH POTS Fiber Mux System is compliant with the 
following industry standards: 

IEEE-80, IEEE-367

IEEE-1590, IEEE-1615

Motorola R56

BR 876-310-100 BT (Telcordia)

Bellcore SR-3966

IEEE 802.3, IEEE 802.1Q (VLAN)

ITU-T V.24

The leader in
rugged fiber optic 
technology.

 

Unconditional

Lifetime Warranty

USER GUIDE

RLH Industries, Inc.

Contents

_________________________

Introduction 

 

1

_________________

General Safety Practices 

 

2

____________________________

Acronyms

 

3

__________________________

Front Panel 

 

3

__________________________

Back Panel 

 

4

___________________________

Installation

 

7

____________________

Application Diagram

 

7

___________________

Ordering Information

 

9

________________________

Specifications

 

10

____________________

Technical Support 

 

11

__________________________

Warranty 

 

11

Summary of Contents for RLH-PM-3 Series















Reviews: