background image

Visit our Website at:

Electrical Rating:
280W (1.16A) Max. at 240V 50Hz

YEARS

WARRANTY

2

 distributed by

Robinson Industries Ltd

P.O. Box 51 201, Pakuranga

Auckland, New Zealand

TEL: 64 (9) 272 5129
FAX: 64 (9) 272 5148

ISO9001 Certified

email: enquiries@robinhood.co.nz

 for service of advice in Australia contact

Robinhood Pty Ltd A.C.N 079 616 550

P.O. Box 4189, Mulgrave

Victoria 3170

TEL: 1800 648 556
FAX: 1800 628 577

email: enquiries@robinhood.co.nz

RECOMMENDS UNIDUCT DUCTING

SYSTEMS FOR RANGEHOODS

104474 Issue C
ECN: 07 007

RIIC9G

P R O D U C T   D I M E N S I O N S

C A N O P Y   I N S T A L L A T I O N   I N S T R U C T I O N

All Dimensions are in millimeters

- 1 -

- 8 -

Summary of Contents for RIIC9G

Page 1: ...email enquiries robinhood co nz for service of advice in Australia contact Robinhood Pty Ltd A C N 079 616 550 P O Box 4189 Mulgrave Victoria 3170 TEL 1800 648 556 FAX 1800 628 577 email enquiries robinhood co nz RECOMMENDS UNIDUCT DUCTING SYSTEMS FOR RANGEHOODS 104474 Issue C ECN 07 007 RIIC9G P R O D U C T D I M E N S I O N S C A N O P Y I N S T A L L A T I O N I N S T R U C T I O N All Dimensio...

Page 2: ... installation consideration should be given to the difficulties to be found during installation and to the bulky weight of the hood The manufacturer cannot be found liable for any damages to improper installation C O N T R O L P A N E L The hood is equipped with the following controls Button Light ON OFF Button Fan ON OFF in first speed suitable for a continuous change of air to be used with littl...

Page 3: ...nnection is to be easily accessible after installation GREASE FILTERS Particular care must be taken with grease filters which must be periodically cleaned at least every two months Remove the grease filters and wash them either by hand or in the dishwasher using mild detergent Use lukewarm water and mild detergent to clean stainless steel components In high humidity and coastal environments cleani...

Page 4: ... secure by tightening the 4 screws using the socket head screw wrench provided D adjusting the height from the hob and bearing in mind that the canopy item to be fitted subsequently is 7 cm high In any event in this position the lower part of the frame must not be positioned at less than 72 cm from the underlying hob 3 INSTALLATION 3 1 Fitting of upper telescopic frame TS The frame is suitable for...

Reviews: