Roca LUMEN Installation Manual Download | Manualshive

Page: 1 / 20

background image

8-11301000

LUMEN

CONTENTS

Safety precautions

.........................................................................................2

Installing the product

...................................................................................4

Installation requirements

............................................................................4

Product carton contents .............................................................4
Power supply .............................................................................5
Water supply..............................................................................5
Water pressure ...........................................................................5
Minimum installation clearance ................................................5
Remote control unit mounting location ....................................6
Water supply hose. ....................................................................6
Water supply location................................................................6

Names of parts

...............................................................................................7

Installation

......................................................................................................8

Trial operation

.............................................................................................17

Check the shower and bidet spray...........................................17
When the spray strength is weak, clean the strainer. ..............18
Drain out the water if a freeze is expected before handing
the product to the customer. ....................................................19

This manual includes
important safety and
installation information.
Please follow the cautions
given in this manual.

In case an accident occurs as
a result of improper
installation, we will in no case
assume responsibility for
damages.

Please give this manual to the
next user when you move or
give this product to another
person.

Before installing, read the instructions completely in order to install

the product properly and prevent accidents in use.

After installation is completed, keep this manual where you can refer to it easily.

Installation Manual

MULTIFUNCION

MULTIFUNCION

LUMEN

Installation Manual

1
2
3
...
»

Summary of Contents for LUMEN





















Reviews:

No comments

Related manuals for LUMEN

Brand: NATURE LOO Pages: 18

Brand: miseno Pages: 5

Brand: Noro Pages: 6

Brand: Kohler Pages: 39

KARING 2.0 K-77780TW-0

Brand: Kohler Pages: 47

REACH K-3834T-2

Brand: Kohler Pages: 7

SAN RAPHAEL GRANDE K-8688T-HC

Brand: Kohler Pages: 8

Brand: Kallista Pages: 12

Brand: IFO Pages: 24

Brand: nella Pages: 10

SPALET ADVANCED CLEAN 3.0

Brand: AS Americas Pages: 5

Brand: Bradley Pages: 2

Brand: American Standard Pages: 4

Brand: American Standard Pages: 7

Brand: American Standard Pages: 4

Brand: American Standard Pages: 8

Brand: Toto Pages: 4

Brand: Kohler Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands