background image

Package contents

•  Induction battery charger
•  Battery packs (2)
• AC 

adapter

•  Quick Setup Guide

Features

Induction battery charger base (front)

 

 

#

Description

#

Description

1

Charge indicator

3

On/Off  switch

2

DC IN jack

4

Charge indicator

Induction battery charger base (top)

 

RF-GXBX011

Installing the battery pack

1

  Remove the controller battery compartment cover.

2

  Install the battery pack into the controller.

 

3

  Plug the AC adapter into the 

DC IN

 jack on the charger and 

into a power outlet.

 

Using the charger

Important

: The battery pack must be fully charged before you use it for 

the fi rst time. Allow up to four hours for the fi rst charge.

1

  Turn on the charger.

2

  Locate the sticker on the top of the charger, then place the 

controller on the charger. For best performance, center the 
battery pack where the sticker indicates.

 

If the charger detects a battery, charging starts and the glow bar 
lights red. When charging is complete, the glow bar lights green.

QUICK SETUP GUIDE

Xbox 360™ Induction Battery Charger Kit

Battery notes:

• 

Rechargeable batteries only attain maximum charging capacity once 
they have been charged/discharged several times.

• 

The battery has a limited service life and playing time is reduced after 
many charging cycles.

• 

Do not short-circuit the battery or place it in fi re.

• 

Unusable batteries should be disposed of as hazardous waste. Do not 
dispose of batteries in household waste.

Important safety information

1)   Read these instructions.

2)   Keep these instructions.

3)   Heed all warnings.

4)   Follow all instructions.

5)   Do not use this apparatus near water.

6)   Clean only with a dry cloth.

7)   Do not install near any heat sources such as radiators, heat registers, 

stoves, or other apparatus (including amplifi ers) that produce heat.

8)   Do not defeat the safety purpose of the polarized plug. A polarized 

plug has two blades with one wider than the other. The wide blade 
is provided for your safety. If the provided plug does not fi t into your 
outlet, consult an electrician for replacement of the obsolete outlet.

9) Protect the power cord from being walked on or pinched particularly 

at plugs, convenience receptacles, and the point where they exit from 
the apparatus.

10) Only use attachments/accessories specifi ed by the manufacturer.

11) Unplug this apparatus during lightning storms or when unused for 

long periods of time.

12) Refer all servicing to qualifi ed service personnel. Servicing is required 

when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has been exposed to rain 
or moisture, does not operate normally, or has been dropped.

Reviews: